Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
Avg
score:
–
Topics
done:
0/23

Recycling

Practise 15 exam-style questions on Recycling for OCR GCSE Combined Science (Chemistry Paper 4). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 15 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
15 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

At a recycling plant, used steel cans and used aluminium cans arrive mixed together. A large magnet is used to separate them.

Why does this work?

Choose your answer.

  • A Aluminium is attracted to a magnet more strongly than steel.
  • B Aluminium is denser than steel.
  • C Steel is magnetic but aluminium is not.
  • D Steel is more reactive than aluminium.

Model answer

C - Steel is magnetic but aluminium is not.

Explanation

Recycling starts with sorting the waste into separate materials. Steel contains iron, which is magnetic, so a magnet can lift steel cans out of a mixture. Aluminium is not magnetic, so the aluminium cans are left behind and can be recycled separately.

Mark scheme
  1. 1 mark

    C / Steel is magnetic but aluminium is not.

    The only correct answer is C: steel is mostly iron, which is magnetic, so the magnet picks out the steel cans and leaves the aluminium cans behind. A is not correct because aluminium is not attracted to a magnet at all. B is not correct because aluminium is much less dense than steel, and density is not what a magnet acts on. D is not correct because iron (steel) is less reactive than aluminium, and reactivity does not affect magnetism. ALLOW the letter or the option. If more than one option is given, do not award the mark.

Question 2

2 marks

A scrapyard has shredded car parts. The pieces contain aluminium, copper and iron.

The pieces are heated to 700 °C in a furnace with a sloping floor. Any molten (liquid) metal runs down the floor and out of the furnace.

Melting points: aluminium 660 °C, copper 1085 °C, iron 1538 °C

Use the melting points to explain how this separates the aluminium from the other metals.

Model answer

The furnace is at 700 °C, which is above the melting point of aluminium (660 °C), so the aluminium melts and the liquid runs out of the furnace. 700 °C is below the melting points of copper (1085 °C) and iron (1538 °C), so these metals stay solid and are left behind.

Explanation

A substance is liquid when the temperature is above its melting point and solid when the temperature is below it. Choosing a temperature between the melting points lets the aluminium melt while the other metals stay solid. This links using data to predict states (Paper 3) with a recycling process.

Mark scheme
  1. 1 mark

    700 °C is above the melting point of aluminium (660 °C), so the aluminium melts / becomes liquid and runs out (of the furnace)

    ALLOW the furnace is hotter than 660 °C. A reference to the temperatures is needed: DO NOT ALLOW 'aluminium melts' on its own.

  2. 1 mark

    700 °C is below the melting points of copper (1085 °C) and iron (1538 °C), so they stay solid (and are left behind in the furnace)

    ALLOW copper and iron have melting points higher than 700 °C so they do not melt. Both copper and iron are needed for the mark.

Question 3

2 marks

Expanded polystyrene (EPS) is used as packaging for televisions. It is about 98% air, so a lorry full of loose EPS carries only a small mass of plastic.

Some recycling centres use a machine that squashes EPS into dense blocks before it is taken to a recycling plant.

Explain why squashing the EPS makes recycling it more worthwhile.

Model answer

Squashing removes the air, so the blocks take up much less space and each lorry can carry a much greater mass of plastic. Fewer journeys are needed, so less fuel is burned and transporting the EPS costs less for each kilogram recycled.

Explanation

The cost and energy of transport are important factors in deciding whether to recycle a material. Very light, bulky materials are expensive to transport for the small mass of material they contain. Making them denser reduces the number of journeys, so recycling becomes more worthwhile.

Mark scheme
  1. 1 mark

    the blocks take up less space / volume, so a lorry can carry a much greater mass of EPS (in each load)

    ALLOW the air is squeezed out so more plastic fits in the lorry.

  2. 1 mark

    so fewer lorry journeys are needed, so less fuel is used / transport costs less / less carbon dioxide is released

    ALLOW transport is cheaper for each kg of plastic recycled. Point 2 can be awarded without point 1 if fewer journeys are linked to less fuel or cost.

Question 4

4 marks

A factory makes glass wool loft insulation by melting glass and spinning it into fine fibres. These are the factory's figures for one year:

• the factory uses 60 000 tonnes of glass
• 75% of this glass is recycled glass from bottle banks
• each tonne of recycled glass used saves 1.2 tonnes of raw materials and 0.25 tonnes of carbon dioxide.

Calculate the mass of raw materials saved and the mass of carbon dioxide saved in one year.

Give one other environmental advantage of using recycled glass.

Model answer

Mass of recycled glass = 60 000 × 75 ÷ 100 = 45 000 tonnes
Raw materials saved = 45 000 × 1.2 = 54 000 tonnes
Carbon dioxide saved = 45 000 × 0.25 = 11 250 tonnes
Another advantage: less waste glass is sent to landfill.

Explanation

First find the mass of recycled glass (75% of 60 000 tonnes), because the savings are for each tonne of recycled glass, not each tonne of all the glass. Then multiply by each saving. Glass wool is a good example of a material recycled for a different use: bottles become insulation.

Mark scheme
  1. 1 mark

    mass of recycled glass = 60 000 × 75 ÷ 100 = 45 000 (tonnes); or a correct final answer of 54 000 tonnes of raw materials and 11 250 tonnes (11 300 / 11 000 tonnes) of carbon dioxide with no working

    An answer of 54 000 tonnes of raw materials and 11 250 tonnes (or 11 300 or 11 000 tonnes) of carbon dioxide with no working scores marking points 1 to 3 only. For the advantage (points 4 and 5): 1 mark for either, max 1. If more than one answer is given, a wrong one cancels a right one. ALLOW 72 000 tonnes and 15 000 tonnes (the 75% not used) for points 2 and 3 only.

  2. 1 mark

    raw materials saved = 45 000 × 1.2 = 54 000 (tonnes); or a correct final answer of 54 000 tonnes of raw materials and 11 250 tonnes (11 300 / 11 000 tonnes) of carbon dioxide with no working

    ALLOW ECF from a wrong mass of recycled glass in point 1.

  3. 1 mark

    carbon dioxide saved = 45 000 × 0.25 = 11 250 (tonnes) / 11 300 (tonnes) / 11 000 (tonnes)

    ALLOW ECF from a wrong mass of recycled glass in point 1. IGNORE units.

  4. 1 mark

    less (waste) glass is sent to landfill

    IGNORE saves raw materials / less carbon dioxide (already given in the question).

  5. 1 mark

    less energy / fuel is needed (recycled glass melts more easily than the raw materials)

    ALLOW less damage from quarrying sand (habitats / landscape).

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.