Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
Avg
score:
–
Topics
done:
0/23

Methods for measuring rates of reaction

Practise 15 exam-style questions on Methods for measuring rates of reaction for OCR GCSE Combined Science (Chemistry Paper 4). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 15 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
15 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

Two students follow the reaction between calcium carbonate and dilute hydrochloric acid.

• Student P collects 60 cm³ of carbon dioxide in 2 minutes.
• Student Q collects 45 cm³ of carbon dioxide in 30 seconds.

How many times greater is the mean rate of reaction in student Q's experiment than in student P's experiment?

Choose your answer.

  • A 20
  • B 4
  • C 3
  • D 0.33

Model answer

C - 3

Explanation

Work out each mean rate in the same unit first: P = 60 cm³ ÷ 120 s = 0.5 cm³/s and Q = 45 cm³ ÷ 30 s = 1.5 cm³/s. Then divide: 1.5 ÷ 0.5 = 3, so Q's reaction was three times as fast. Comparing only the times (120 ÷ 30 = 4) would be right only if the two volumes were the same.

Mark scheme
  1. 1 mark

    C / 3

    The only correct answer is C: 2 minutes = 120 s, so P's mean rate is 60 ÷ 120 = 0.5 cm³/s and Q's mean rate is 45 ÷ 30 = 1.5 cm³/s; 1.5 ÷ 0.5 = 3. A is not correct because 20 comes from 60 ÷ 2 = 30 (a rate in cm³/min) divided by 1.5 (a rate in cm³/s), which mixes minutes and seconds. B is not correct because 4 is 120 s ÷ 30 s, the ratio of the times only, which ignores that the two volumes are different. D is not correct because 0.33 is P's rate divided by Q's rate, which is the wrong way round. ALLOW the letter or the option. If more than one option is given, do not award the mark.

Question 2

2 marks

Magnesium ribbon reacts with dilute sulfuric acid:

Mg(s) + H₂SO₄(aq) → MgSO₄(aq) + H₂(g)

A student wants to follow the rate of this reaction.

Use the state symbols in the equation to explain why she could measure the volume of gas given off, but could NOT time how long it takes for a cross under the flask to disappear.

Model answer

The state symbol (g) shows that hydrogen is given off as a gas, so it can be collected in a gas syringe and its volume measured at regular times. None of the products has the state symbol (s): magnesium sulfate is (aq), so no precipitate forms. The mixture stays clear, so a cross under the flask would never disappear.

Explanation

State symbols tell you which methods will work. A product shown as (g) can be collected and measured; a product shown as (s) in a solution is a precipitate, which makes the mixture cloudy and can hide a cross. Here the only solid is the magnesium, which is used up, so the disappearing cross method cannot be used.

Mark scheme
  1. 1 mark

    (the state symbol (g) shows that) hydrogen is a gas / one of the products is a gas, so it can be collected (in a gas syringe) and its volume measured

    The answer must say that hydrogen (or a product) is a gas, or refer to H₂(g). ALLOW the gas can be collected over water in a measuring cylinder. IGNORE 'it fizzes' on its own.

  2. 1 mark

    none of the products has the state symbol (s) / no solid (precipitate) is made, so the mixture does not go cloudy and the cross does not disappear

    ALLOW the products are aqueous or a gas / MgSO₄ is (aq), so nothing hides the cross. ALLOW the only solid, Mg(s), is a reactant that is used up. DO NOT ALLOW 'the magnesium sulfate is a solid'.

Question 3

2 marks

A student expects the reaction between marble chips and dilute nitric acid to finish after about 4 minutes. She will read the volume of carbon dioxide in a gas syringe every 20 seconds, starting with a reading at 0 seconds.

Calculate how many readings she will take from 0 seconds up to 4 minutes.

Suggest why reading the volume every 20 seconds is better than reading it every 2 minutes.

Model answer

4 minutes = 240 s. 240 ÷ 20 = 12 intervals, so there are 12 + 1 = 13 readings, including the one at 0 s.
Reading every 20 seconds gives many more points, so she can draw a curve that shows how the rate changes and see when the reaction stops. Readings every 2 minutes would give only 3 points.

Explanation

Count the intervals and then add one for the reading at the start: 240 ÷ 20 = 12 intervals, so 13 readings. Frequent readings are needed for a reaction whose rate changes quickly, so that the graph shows the shape of the curve and the time when the volume stops changing.

Mark scheme
  1. 1 mark

    13 (readings) / 4 minutes = 240 s, 240 ÷ 20 = 12 intervals, plus the reading at 0 s = 13

    An answer of 13 with no working scores marking point 1 only. DO NOT ALLOW 12 (the reading at 0 s is left out) or 3 (readings every 2 minutes).

  2. 1 mark

    more readings / more points to plot, so she can see how the rate changes (the shape of the curve)

    For the reason, 1 mark for any one of points 2 and 3, max 1. If more than one answer is given, a wrong one cancels a right one. ALLOW reading every 2 minutes gives only 3 readings (0, 2 and 4 minutes), which is too few to draw a curve. IGNORE 'more accurate' or 'more reliable' on their own.

  3. 1 mark

    she can tell more exactly when the reaction finishes / the volume stops changing

    ALLOW the reaction may finish between readings 2 minutes apart, so she would not know when it finished.

Question 4

4 marks

Iron reacts slowly with oxygen and water to form rust.

A student pushes some damp iron wool into the bottom of a measuring cylinder. She stands the measuring cylinder upside down in a trough of water, so that 100 cm³ of air is trapped above the water.

As the iron rusts, the water rises up the measuring cylinder. After 5 days, the volume of air left is 88 cm³.

Calculate the mean rate at which oxygen is used up, in cm³ per day, over the 5 days.

Explain why the water rises up the measuring cylinder.

Model answer

Volume of oxygen used = 100 − 88 = 12 cm³
Mean rate = 12 ÷ 5 = 2.4 cm³ per day
The iron reacts with the oxygen in the trapped air as it rusts, so the oxygen is used up. The volume of gas in the cylinder gets smaller, so water rises up the cylinder to take its place.

Explanation

Here the rate is followed by measuring a reactant being used up rather than a product being made: the fall in the volume of air is the volume of oxygen that has reacted. Mean rate = change in volume ÷ time = 12 ÷ 5 = 2.4 cm³ per day. A common slip is to divide 88 cm³ (the air left) by 5 instead of the change in volume.

Mark scheme
  1. 1 mark

    volume of oxygen used = 100 − 88 = 12 (cm³); or a correct final answer of 2.4 cm³ per day with no working

    An answer of 2.4 cm³ per day with no working scores marking points 1 and 2 only. DO NOT ALLOW 17.6 (88 ÷ 5) or 20 (100 ÷ 5) for either mark.

  2. 1 mark

    (mean rate =) 12 ÷ 5 = 2.4 (cm³ per day)

    ALLOW ECF from a wrong volume of oxygen in point 1, divided by 5. IGNORE units unless the question asks for them.

  3. 1 mark

    oxygen (in the trapped air) reacts with the iron / is used up in rusting

    DO NOT ALLOW 'the air is used up' or 'nitrogen reacts'. IGNORE 'water reacts' if oxygen is also named.

  4. 1 mark

    so the volume of gas in the cylinder gets smaller, and water rises to take its place / is pushed up by the air outside

    ALLOW the gas takes up less space, so water moves up into the space. This mark needs the idea that the volume of gas decreases.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.