Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
Avg
score:
–
Topics
done:
0/23

Explaining rates: collision theory and surface area

Practise 16 exam-style questions on Explaining rates: collision theory and surface area for OCR GCSE Combined Science (Chemistry Paper 4). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 16 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
16 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

The instructions on a can of oven cleaner say that it works faster on a warm oven than on a cold oven. The cleaner reacts with burnt-on grease.

How does warming change the collisions between the cleaner particles and the grease particles?

Choose your answer.

  • A fewer collisions each second, and a greater proportion of the collisions are successful
  • B more collisions each second, and a greater proportion of the collisions are successful
  • C more collisions each second, and the same proportion of the collisions are successful
  • D the same number of collisions each second, and a greater proportion of the collisions are successful

Model answer

B - more collisions each second, and a greater proportion of the collisions are successful

Explanation

A higher temperature affects collisions in two ways: the particles move faster, so they collide more often, and the collisions have more energy, so a greater proportion of them have at least the activation energy. Both give more successful collisions each second, so the reaction is faster. The activation energy itself does not change, and option C is incomplete because it gives only the first of the two effects.

Mark scheme
  1. 1 mark

    B / more collisions each second, and a greater proportion of the collisions are successful

    The only correct answer is B: at a higher temperature the particles have more (kinetic) energy and move faster, so they collide more often, and a greater proportion of the collisions have at least the activation energy, so a greater proportion are successful. A is not correct because faster-moving particles collide more often, not less often. C is not correct because the collisions also have more energy, so a greater proportion of them have at least the activation energy. D is not correct because the particles move faster, so there are more collisions each second. ALLOW the letter or the option. If more than one option is given, do not award the mark.

Question 2

2 marks

The equations for two reactions are shown.

Reaction 1: CaCO₃(s) + 2HCl(aq) → CaCl₂(aq) + H₂O(l) + CO₂(g)
Reaction 2: NaOH(aq) + HCl(aq) → NaCl(aq) + H₂O(l)

A student says: 'Changing the surface area to volume ratio of a reactant will change the rate of both reactions.'

Use the state symbols in the equations to explain why the student is wrong.

Model answer

In reaction 2, both reactants have the state symbol (aq), so they are both dissolved in water and there is no solid. Surface area to volume ratio only matters when a reactant is a solid, because the other reactant's particles can only collide with the particles on the surface of the solid. So it changes the rate of reaction 1, where calcium carbonate is (s), but not the rate of reaction 2.

Explanation

State symbols show the physical state of each substance: (s) solid, (l) liquid, (g) gas and (aq) dissolved in water. A solid reacts only at its surface, so breaking it into smaller pieces exposes more particles and makes collisions more frequent. When both reactants are dissolved, their particles are already mixed through the solution, so there is no surface area to change.

Mark scheme
  1. 1 mark

    in reaction 2 both reactants are aqueous / (aq) / dissolved in water / there is no solid (s) reactant in reaction 2

    ALLOW sodium hydroxide and hydrochloric acid are both solutions. ALLOW reaction 1 has a solid reactant (s) but reaction 2 does not. IGNORE state symbols of the products.

  2. 1 mark

    surface area (to volume ratio) only affects the rate when a reactant is a solid, because the other reactant's particles can only collide with particles on the surface of the solid

    ALLOW changing the size of the pieces of calcium carbonate (s) changes the rate of reaction 1 only. ALLOW particles in solution are spread through the liquid, so there is no surface to change. ALLOW surface area only matters for solids. DO NOT ALLOW surface area affects gases or solutions.

Question 3

2 marks

A cube of zinc has sides of 1 cm. Its volume is 1 cm³ and its surface area is 6 cm².

The same volume of zinc (1 cm³) is rolled into a thin flat sheet. The surface area of the sheet is about 200 cm².

Calculate how many times greater the surface area to volume ratio of the sheet is than that of the cube.

The cube and the sheet are each put into the same volume of the same dilute hydrochloric acid. Explain why the sheet reacts faster.

Model answer

Cube: 6 ÷ 1 = 6 : 1. Sheet: 200 ÷ 1 = 200 : 1. 200 ÷ 6 = 33, so the ratio is about 33 times greater.
The sheet has a much larger surface area to volume ratio, so much more zinc is exposed to the acid. Acid particles collide with the zinc more frequently, so the reaction is faster.

Explanation

Both pieces have the same volume, so compare the ratios by dividing: 200 ÷ 6 = 33. Only zinc atoms on the surface can be hit by acid particles, so the sheet, with far more surface for the same amount of zinc, has more frequent collisions. Subtracting (200 − 6) does not answer 'how many times'.

Mark scheme
  1. 1 mark

    ratio for the cube = 6 : 1 and for the sheet = 200 : 1, so 200 ÷ 6 = 33 (times); or a correct final answer of 33 (or 33.3) with no working

    An answer of 33 (or 33.3 or 33.33) with no working scores marking point 1 only. DO NOT ALLOW 194 (200 − 6) or 0.03 (6 ÷ 200).

  2. 1 mark

    the sheet has a much larger surface area to volume ratio / much more of the zinc is exposed to the acid, so acid particles collide with the zinc more frequently (more collisions each second)

    The idea of more surface (or a larger ratio) AND more frequent collisions is needed. DO NOT ALLOW the sheet contains more zinc / the particles have more energy.

Question 4

4 marks

A scientist uses a simple computer model of a reaction between two gases. The model is simplified: it uses far fewer particles than a real gas. The table shows the model's results for two temperatures.

Only collisions with at least the activation energy lead to a reaction.

Calculate the number of successful collisions each second at 20 °C and at 40 °C.

Use your answers and the table to explain why the reaction is much faster at 40 °C.

Table with columns "Temperature (°C)", "Number of collisions each second (millions)", "Percentage of collisions with at least the activation energy (%)". Temperature (°C): 20; Number of collisions each second (millions): 500; Percentage of collisions with at least the activation energy (%): 2 | Temperature (°C): 40; Number of collisions each second (millions): 520; Percentage of collisions with at least the activation energy (%): 8.

Model answer

At 20 °C: 2 ÷ 100 × 500 = 10 million successful collisions each second
At 40 °C: 8 ÷ 100 × 520 = 41.6 million (about 42 million) successful collisions each second

At 40 °C the particles have more energy and move faster. The number of collisions each second goes up only a little, from 500 million to 520 million, but the percentage of collisions with at least the activation energy goes up from 2 % to 8 %. So there are about four times as many successful collisions each second, and the reaction is much faster.

Explanation

To find a percentage of a number, divide the percentage by 100 and multiply: 2 % of 500 million is 10 million. Warming makes the particles collide a little more often, but the much bigger effect is that a larger share of the collisions have at least the activation energy. Take care to use 520 million collisions, not 500 million, for 40 °C.

Mark scheme
  1. 1 mark

    (at 20 °C) 2 ÷ 100 × 500 = 10 (million); or a correct final answer of 10 million with no working

    An answer of 10 million (at 20 °C) and 41.6 million or 42 million (at 40 °C) with no working scores marking points 1 and 2 only. ALLOW 10 000 000. ALLOW 0.02 × 500.

  2. 1 mark

    (at 40 °C) 8 ÷ 100 × 520 = 41.6 (million) / 42 (million); or a correct final answer of 41.6 million or 42 million with no working

    ALLOW 41 600 000 / 42 000 000. ALLOW 0.08 × 520. DO NOT ALLOW 40 (million) from 8 ÷ 100 × 500 (the wrong number of collisions used).

  3. 1 mark

    at the higher temperature the particles have more energy, so a much greater percentage of collisions have at least the activation energy (8 % instead of 2 %)

    ALLOW the percentage of collisions with enough energy is four times larger. ALLOW the particles move faster, so more of the collisions are successful. DO NOT ALLOW the activation energy is lower at 40 °C.

  4. 1 mark

    the number of collisions each second goes up only a little (500 million to 520 million), so the rate is much faster mainly because there are about four times as many successful collisions each second

    ALLOW ECF from the values in points 1 and 2 (the number of successful collisions each second is about 4 times larger). ALLOW the collisions are slightly more frequent but many more are successful. There must be a comparison of the numbers of successful collisions or a use of the collision data from the table.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.