Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
Avg
score:
–
Topics
done:
0/23

Atmospheric pollutants

Practise 14 exam-style questions on Atmospheric pollutants for OCR GCSE Combined Science (Chemistry Paper 4). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 14 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
14 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

Diesel engines release particulates, which are tiny pieces of solid carbon (soot).

What causes the soot to form?

Choose your answer.

  • A Nitrogen from the air reacts with oxygen at a very high temperature.
  • B Sulfur impurities in the fuel react with oxygen from the air.
  • C There is not enough oxygen for all the fuel to burn completely.
  • D Water vapour in the hot exhaust gases cools down and condenses.

Model answer

C - There is not enough oxygen for all the fuel to burn completely.

Explanation

Diesel is a mixture of hydrocarbons. When there is plenty of oxygen, the carbon in the fuel forms carbon dioxide, but when the oxygen is limited the fuel burns incompletely and some carbon is left as solid soot (and some forms carbon monoxide). The other options describe how oxides of nitrogen, sulfur dioxide and water are formed.

Mark scheme
  1. 1 mark

    C / There is not enough oxygen for all the fuel to burn completely.

    The only correct answer is C: when there is not enough oxygen, some of the fuel undergoes incomplete combustion, and some of the carbon in the fuel is left unburnt as soot. A is not correct because this reaction forms oxides of nitrogen, which are gases; B is not correct because burning sulfur impurities forms sulfur dioxide, a gas; D is not correct because condensing water vapour forms liquid water, not solid carbon. ALLOW the letter or the option. If more than one option is given, do not award the mark.

Question 2

2 marks

Coal-burning power stations in many countries remove sulfur dioxide from their waste gases before the gases leave the chimney. The waste gases are sprayed with a mixture of powdered limestone (calcium carbonate) and water. The solid that forms is used to make plasterboard.

Sulfur dioxide is an oxide of a non-metal.

Explain why calcium carbonate can be used to remove sulfur dioxide from the waste gases.

Model answer

Sulfur dioxide is an oxide of a non-metal, so it is acidic: with water it forms an acid. Calcium carbonate reacts with acids and neutralises them, so it reacts with the sulfur dioxide and turns it into a solid calcium salt, which stays behind instead of going out of the chimney.

Explanation

This uses two ideas from Paper 3: oxides of non-metals are acidic (C2.2a), and carbonates react with acids to neutralise them (C3.3f). The sulfur dioxide is not just filtered out: it reacts with the limestone to form a solid salt. Calling sulfur dioxide a base, or saying the limestone simply soaks it up, misses the chemistry.

Mark scheme
  1. 1 mark

    sulfur dioxide is an acidic oxide (because it is an oxide of a non-metal) / sulfur dioxide forms an acid with water

    Mark the two points independently. ALLOW sulfur dioxide is an acidic gas. ALLOW sulfur dioxide dissolves in water to form an acid / sulfurous acid. DO NOT ALLOW sulfur dioxide is an alkali / a base.

  2. 1 mark

    calcium carbonate reacts with / neutralises acids, so it reacts with the sulfur dioxide and turns it into a solid (calcium) salt, removing it from the gases

    ALLOW carbonates neutralise acids (forming a salt, water and carbon dioxide). ALLOW calcium carbonate is a base that reacts with the acidic gas. IGNORE limestone absorbs the gas / traps the gas with no reaction.

Question 3

2 marks

A town council plans to build a bypass, a new road that takes traffic around the town instead of through the town centre.

The council says: 'The bypass will improve air quality.'

Give one reason why the bypass could improve the air quality in the town centre, and one reason why it may not reduce the total amount of pollutants released by the traffic.

Model answer

In the town centre: fewer vehicles drive through it, so less nitrogen dioxide and fewer particulates are released where people live and walk.

Total pollutants: the vehicles still burn the same fuel (or more, if the bypass is longer), so the pollutants are still released, just in a different place.

Explanation

Air quality depends on where pollutants are released as well as how much. A bypass moves exhaust gases away from crowded streets, which helps the people there, but it does not stop the fuel being burned. Evaluating a claim like this means looking at both sides.

Mark scheme
  1. 1 mark

    fewer vehicles drive through the town centre, so less nitrogen dioxide / oxides of nitrogen, carbon monoxide or particulates are released where people live, shop and walk

    Mark the two points independently. For each part: If more than one answer is given, a wrong one cancels a right one. ALLOW less traffic queuing (with engines running) in the town centre, so less exhaust gas there. IGNORE 'less pollution' with no idea of where.

  2. 1 mark

    the same vehicles still burn fuel on the bypass (and the route may be longer, so they burn more fuel), so the pollutants are just released somewhere else

    ALLOW a new road can attract more traffic, so more fuel is burned. ALLOW the pollution moves to the people who live near the bypass.

Question 4

4 marks

A scientist measured the particulates in the air beside a building site, where diesel diggers and generators were working all day. A pump pulled 24 m³ of air through a device that lets only PM2.5 particulates reach a filter. After 24 hours, the mass of the filter had increased by 552 μg (micrograms).

Use the equation: concentration of particulates = mass of particulates ÷ volume of air

Calculate the concentration of PM2.5 particulates in μg/m³.

In 2021, the World Health Organization (WHO) said that the mean concentration of PM2.5 particulates over 24 hours should not be more than 15 μg/m³.

Compare your answer with the WHO guideline. Suggest one source of the particulates at the building site.

Model answer

Concentration = 552 ÷ 24 = 23 μg/m³

This is higher than the WHO guideline of 15 μg/m³, by 8 μg/m³. The particulates probably came from the exhaust of the diesel diggers and generators, where some of the fuel burns incompletely and forms soot.

Explanation

Substitute into the equation given: 552 μg ÷ 24 m³ = 23 μg/m³. The mass is already in micrograms, so no unit conversion is needed. Comparing with the guideline means saying whether the value is above or below 15 μg/m³ (here it is above). On a building site, particulates come from diesel engines (soot from incomplete combustion) and from dust made by digging and cutting.

Mark scheme
  1. 1 mark

    concentration = 552 ÷ 24; or a correct final answer of 23 μg/m³ with no working

    An answer of 23 μg/m³ with no working scores marking points 1 and 2 only. For the source, 1 mark for any one of points 4 and 5, max 1. If more than one answer is given, a wrong one cancels a right one. DO NOT ALLOW 24 ÷ 552 = 0.043 (wrong way round).

  2. 1 mark

    evaluation: 23 (μg/m³)

    IGNORE units unless the question asks for them.

  3. 1 mark

    comparison: the concentration is higher than (above) the WHO guideline

    ALLOW higher by 8 μg/m³ / about one and a half times the guideline. ALLOW ECF from a wrong concentration if the comparison with the guideline is correct for that value. A comparison is needed, not just a value.

  4. 1 mark

    source: exhaust from the diesel engines of the diggers and generators, where some fuel burns incompletely and forms soot

    ALLOW diesel engines / machines burning fuel. IGNORE factories / power stations / cars on other roads (the question is about the building site).

  5. 1 mark

    source: dust from digging, drilling or cutting materials (such as soil, concrete or bricks)

    ALLOW dust blown up from the ground by the machines.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.