Question 1
1 markA student measures the resistance of a resistor using an ammeter and a voltmeter. The resistor is labelled 47 Ω. She calculates a resistance of 470 Ω.
Which mistake would make her value ten times too large?
Choose your answer.
- A She did not reset the voltmeter to zero, and it read 0.1 V with nothing connected.
- B She measured the current at a different point in the series circuit.
- C She recorded the current in milliamps but used the number as amps.
- D She wrote the current as 0.010 A when the ammeter showed 0.10 A.
Model answer
D - She wrote the current as 0.010 A when the ammeter showed 0.10 A.
Explanation
Comparing a result with the expected value is a quick check: a value exactly ten times too big points to a slip with a decimal point or a power of ten. Because resistance = p.d. ÷ current, a current recorded ten times too small makes the resistance ten times too large. A small zero error changes the result only a little, and moving the ammeter round a series circuit does not change its reading at all.
Mark scheme
-
1 mark
D / She wrote the current as 0.010 A when the ammeter showed 0.10 A.
The only correct answer is D: resistance = p.d. ÷ current, so a current ten times too small gives a resistance ten times too large (for example 4.7 V ÷ 0.010 A = 470 Ω instead of 4.7 V ÷ 0.10 A = 47 Ω). A is not correct because a 0.1 V zero error changes the p.d., and so the resistance, by only a small amount. B is not correct because the current is the same at every point in a series circuit. C is not correct because using milliamps as amps makes the current a thousand times too large, so the resistance would be far too small. ALLOW the letter or the option. If more than one option is given, do not award the mark.