Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
Avg
score:
–
Topics
done:
0/27

Density

Practise 16 exam-style questions on Density for OCR GCSE Combined Science (Physics Paper 5). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 16 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
16 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

A sealed packet of crisps is taken on an aeroplane. During the flight, the packet swells up because the air inside it takes up a larger volume. No air gets into or out of the packet.

What happens to the mass and the density of the air inside the packet?

Choose your answer.

  • A mass decreases, density decreases
  • B mass stays the same, density decreases
  • C mass stays the same, density increases
  • D mass increases, density stays the same

Model answer

B (mass stays the same, density decreases)

Explanation

The packet is sealed, so the number of air particles inside, and so their mass, does not change. The air spreads out into a larger volume, so there is less mass in each cm³: the density decreases. Do not confuse a change in volume with a change in mass: the packet looks bigger, but it holds the same air.

Mark scheme
  1. 1 mark

    B / mass stays the same, density decreases

    The only correct answer is B: no air particles get in or out, so the mass of the air stays the same, and the same mass in a larger volume has a lower density (density = mass ÷ volume). A is not correct because the mass cannot decrease when no air leaves the packet; C is not correct because a larger volume with the same mass gives a smaller density, not a larger one; D is not correct because the mass cannot increase when no air enters, and the density changes when the volume changes. ALLOW the letter or the option. If more than one option is given, do not award the mark.

Question 2

2 marks

A student writes:

'Density is how heavy an object is.'

Give a correct definition of density.

Explain why the student's definition is wrong.

Model answer

Density is the mass per unit volume of a material (density = mass ÷ volume).
The student's definition only describes the mass of the object and ignores its volume. A large wooden table is heavier than a small iron nail, but iron has the greater density.

Explanation

Density compares mass with volume: it is the mass of each cubic metre (or cubic centimetre) of a material. 'How heavy' describes mass or weight, which depend on the size of the object as well as what it is made of. Two objects can have the same density but very different masses if one is much bigger.

Mark scheme
  1. 1 mark

    density is the mass per unit volume / the mass of 1 m³ (or 1 cm³) of the material / mass ÷ volume

    ALLOW 'how much mass there is in a certain volume'. DO NOT ALLOW 'how heavy something is for its size' unless mass and volume are both clear. DO NOT ALLOW 'mass × volume'.

  2. 1 mark

    the student's definition describes mass (or weight) only and ignores volume (size): a large object made of a low-density material can be heavier than a small object made of a high-density material

    ALLOW a correct example, for example 'a big block of wood can be heavier than a small piece of iron, but iron has the greater density'. ALLOW 'it does not take into account the volume / size of the object'.

Question 3

2 marks

A student wants to find the density of a sugar cube.

She plans to find its volume by lowering it into water in a measuring cylinder and reading how much the water level rises.

Explain why this method will not work. Describe a better way for her to find the volume of the sugar cube.

Model answer

Sugar dissolves in water, so the cube would start to dissolve and the rise in the water level would not show its true volume. A better way is to measure the length, width and height of the cube with a ruler and multiply them together to find its volume.

Explanation

The displacement method only works if the object stays the same while it is under the liquid. A sugar cube dissolves in water, so its volume changes during the measurement. Because a sugar cube is a regular shape, it is easier to measure its sides with a ruler and calculate length × width × height.

Mark scheme
  1. 1 mark

    sugar dissolves in water, so the cube would get smaller (or disappear) and the rise in the water level would not give its volume

    ALLOW 'the sugar would dissolve'. IGNORE 'the cube would get wet' / 'the cube floats' on their own.

  2. 1 mark

    measure the length, width and height of the cube with a ruler and multiply them together (volume = length × width × height)

    Points 2 and 3 are better methods: 1 mark for either point 2 or point 3, max 1. If more than one answer is given, a wrong one cancels a right one. ALLOW 'measure one side and cube it'. A ruler alone with no calculation of the volume scores 0 for this point.

  3. 1 mark

    use the measuring cylinder with a liquid that sugar does not dissolve in (such as cooking oil) and read the rise in level

    ALLOW a named liquid that does not dissolve sugar, for example vegetable oil.

Question 4

4 marks

Some house walls are built from lightweight concrete blocks.

One block is a cuboid 0.44 m long, 0.215 m high and 0.10 m wide. Its mass is 6.6 kg.

Use the equation: density = mass ÷ volume

Calculate the density of the block. Give your answer to 2 significant figures.

Ordinary concrete has a density of about 2400 kg/m³. Suggest why the block has a much lower density than ordinary concrete.

Model answer

volume = 0.44 × 0.215 × 0.10 = 0.00946 m³
density = 6.6 ÷ 0.00946 = 697.7 kg/m³
density = 700 kg/m³ (2 significant figures)
The block probably has lots of tiny air bubbles inside it, so there is less mass in each cubic metre than in ordinary concrete.

Explanation

First find the volume of the cuboid: length × height × width = 0.00946 m³. Then density = 6.6 ÷ 0.00946 = 697.7 kg/m³, which is 700 kg/m³ to 2 significant figures. This is less than a third of the density of ordinary concrete, because lightweight blocks are full of tiny air bubbles, and air has a very low density.

Mark scheme
  1. 1 mark

    volume = 0.44 × 0.215 × 0.10 = 0.00946 (m³); or a correct final answer of 700 kg/m³ (or 697.7 kg/m³ or 698 kg/m³) with no working

    An answer of 700 kg/m³ with no working scores marking points 1 to 3 only. An answer of 697.7 or 698 kg/m³ with no working scores marking points 1 and 2 only. ALLOW 9.46 × 10⁻³ m³.

  2. 1 mark

    density = 6.6 ÷ 0.00946 = 697.7 (kg/m³); or a correct final answer of 700 kg/m³ (or 697.7 kg/m³ or 698 kg/m³) with no working

    ALLOW ECF from a wrong volume. ALLOW 698 / 697.67 kg/m³. DO NOT ALLOW 0.00946 ÷ 6.6.

  3. 1 mark

    700 (kg/m³) to 2 significant figures

    ALLOW ECF for the rounding mark from a wrong answer correctly rounded to 2 significant figures. DO NOT ALLOW 697.7, 698 or 690 for this mark.

  4. 1 mark

    the block contains lots of (tiny) air bubbles / air spaces / holes, so there is less mass in each m³

    ALLOW 'it is made with a material that has a lower density, such as air pockets or a light filler'. IGNORE 'it is lighter' on its own.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.