Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
Avg
score:
–
Topics
done:
0/25

Metals, non-metals and the Periodic Table

Practise 15 exam-style questions on Metals, non-metals and the Periodic Table for OCR GCSE Combined Science (Chemistry Paper 9). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 15 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
15 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

Magnesium burns in oxygen to form magnesium oxide, which contains Mg²⁺ ions and O²⁻ ions.

The radius of a magnesium ion is 7.2 × 10⁻¹¹ m. The radius of an oxide ion is 1.40 × 10⁻¹⁰ m.

In solid magnesium oxide, each magnesium ion touches the oxide ions next to it.

What is the distance between the centre of a magnesium ion and the centre of an oxide ion next to it?

Choose your answer.

  • A 0.212 nm
  • B 0.424 nm
  • C 2.12 nm
  • D 4.24 nm

Model answer

A

Explanation

When two ions touch, the distance between their centres is the radius of one plus the radius of the other. Write both radii with the same power of ten before adding: 0.72 × 10⁻¹⁰ m + 1.40 × 10⁻¹⁰ m = 2.12 × 10⁻¹⁰ m, which is 0.212 nm because 1 nm = 10⁻⁹ m. Distances between the particles in solids are of the order of 10⁻¹⁰ m, a few tenths of a nanometre; adding diameters or converting 10⁻¹⁰ m to 1 nm are the common slips.

Mark scheme
  1. 1 mark

    A / 0.212 nm

    The only correct answer is A: the ions touch, so the distance between their centres is the sum of the two radii: 7.2 × 10⁻¹¹ m + 1.40 × 10⁻¹⁰ m = 0.72 × 10⁻¹⁰ m + 1.40 × 10⁻¹⁰ m = 2.12 × 10⁻¹⁰ m, and 1 nm = 1 × 10⁻⁹ m, so this is 0.212 nm. B is not correct because it adds the two diameters instead of the two radii; C is not correct because it treats 10⁻¹⁰ m as 1 nm (1 nm is 10⁻⁹ m); D is not correct because it adds the diameters and also uses the wrong conversion. ALLOW the letter or the value. If more than one option is given, do not award the mark.

Question 2

2 marks

The striking strip on a box of safety matches contains red phosphorus. When phosphorus burns in plenty of oxygen, it forms the oxide P₄O₁₀.

Red phosphorus can be shown as P in the equation.

Write the balanced symbol equation for the reaction of phosphorus with oxygen.

Model answer

4P + 5O₂ → P₄O₁₀

Explanation

Balance the atoms that appear in only one formula on each side first: P₄O₁₀ contains 4 phosphorus atoms, so 4P are needed, and 10 oxygen atoms, which come from 5 O₂ molecules. Oxygen is diatomic, so it must be written as O₂; writing 10O or changing the formula of the oxide are common errors.

Mark scheme
  1. 1 mark

    4P (on the left)

    The whole equation is 4P + 5O₂ → P₄O₁₀. ALLOW any correct multiple of the whole equation (for example 8P + 10O₂ → 2P₄O₁₀) for both marks. ALLOW typed forms without subscripts (4P + 5O2 → P4O10). DO NOT ALLOW P₄ + 5O₂ → P₄O₁₀ for this mark (the question says to show phosphorus as P), but ALLOW it for the second mark.

  2. 1 mark

    5O₂ (on the left, with P₄O₁₀ on the right)

    DO NOT ALLOW 10O or O₁₀ (oxygen must be written as O₂ molecules). IGNORE state symbols.

Question 3

3 marks

Rocks contain atoms of potassium-40 and atoms of argon-40. Both atoms have a mass number of 40.

Atomic numbers: argon 18, potassium 19

Explain why potassium and argon are in different groups of the Periodic Table, and why potassium is a metal but argon is a non-metal.

Model answer

An element's position in the Periodic Table depends on its atomic number, the number of protons (and so electrons) in its atoms, not on its mass number. An argon atom has 18 electrons, arranged 2.8.8: its outer shell is full, so argon is in Group 0. A potassium atom has 19 electrons, arranged 2.8.8.1: the extra electron starts a fourth shell, so potassium has one outer electron and is in Group 1 (Period 4). Potassium atoms lose this outer electron to form positive ions, which is typical of a metal, whereas argon atoms do not lose or gain electrons and argon is an unreactive gas, a non-metal.

Explanation

Mass number counts protons plus neutrons, so atoms of different elements can have the same mass number. The atomic number decides the electron arrangement and so the group and period. A common error is to think that atoms with the same mass number must be the same element or in the same place in the Periodic Table.

Mark scheme
  1. 1 mark

    the position of an element depends on its atomic number / number of protons (and so electrons), not on its mass number

    Max 3. ALLOW potassium atoms have one more proton / electron than argon atoms.

  2. 1 mark

    argon (2.8.8) has a full outer shell, so it is in Group 0

    ALLOW argon has 8 electrons in its outer shell. ALLOW it is a noble gas.

  3. 1 mark

    potassium (2.8.8.1) has one electron in its outer shell, so it is in Group 1

    ALLOW potassium's extra electron starts a new (fourth) shell, so it is in Group 1 and Period 4.

  4. 1 mark

    potassium atoms lose their outer electron to form positive ions, which is typical of a metal, but argon atoms do not lose or gain electrons (it is an unreactive gas), so it is a non-metal

    ALLOW potassium is on the left of the Periodic Table (metals) and argon is on the far right (non-metals). Both elements must be addressed for this mark.

Question 4

4 marks

Red sand contains iron(III) oxide and silicon dioxide. A student investigates samples of the two pure oxides.

Test 1: She adds each oxide to water with universal indicator. Both mixtures stay green (pH 7) and neither solid dissolves.

Test 2: She adds each oxide to warm dilute hydrochloric acid. The red-brown iron(III) oxide disappears and a yellow-brown solution forms. The white silicon dioxide does not change.

Explain what the results of both tests show about the two oxides, and whether iron and silicon are metals or non-metals.

Model answer

Test 1 does not classify the oxides: neither oxide dissolves in water, so neither can change the pH, and the green colour does not show whether they are acidic or basic.

In test 2 the iron(III) oxide reacts with the hydrochloric acid and forms a yellow-brown solution of iron(III) chloride, so it neutralises the acid: it is a base. Metal oxides are basic, so iron is a metal.

Silicon dioxide does not react with the acid, so it is not a base. This fits silicon being a non-metal, because non-metal oxides are acidic, not basic.

Explanation

The universal indicator test only works for oxides that dissolve in water; an insoluble oxide leaves the water at pH 7 whatever its type. Reacting with an acid shows that an oxide is basic, which is typical of metal oxides. A common error is to conclude from test 1 that both oxides are neutral.

Mark scheme
  1. 1 mark

    test 1: neither oxide dissolves (in water), so the pH 7 result does not show whether they are acidic or basic / test 1 cannot classify them

    ALLOW the oxides are insoluble, so they cannot change the pH of the water. DO NOT ALLOW both oxides are neutral.

  2. 1 mark

    iron(III) oxide reacts with / neutralises the acid (to form a salt solution), so it is a base / basic oxide

    ALLOW iron oxide forms iron(III) chloride (solution). ALLOW alkali for base only if it is linked to reacting with the acid.

  3. 1 mark

    (basic oxides are made by metals, so) iron is a metal

    This mark depends on the idea that iron(III) oxide is basic / reacts with the acid.

  4. 1 mark

    silicon dioxide does not react with the acid, so it is not a base, which fits silicon being a non-metal (whose oxides are acidic)

    ALLOW silicon is a non-metal, because it does not form a basic oxide. DO NOT ALLOW silicon dioxide is neutral, so silicon is a metal.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.