Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
Avg
score:
–
Topics
done:
0/25

Acids, alkalis and neutralisation

Practise 17 exam-style questions on Acids, alkalis and neutralisation for OCR GCSE Combined Science (Chemistry Paper 9). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 17 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
17 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

One mole of each solid is added to an excess of dilute hydrochloric acid. Each solid reacts completely.

Which solid produces the greatest amount, in moles, of gas?

Choose your answer.

  • A aluminium
  • B calcium oxide
  • C magnesium
  • D sodium carbonate

Model answer

A - aluminium

Explanation

Predict the products and balance each equation, then compare the moles of gas for 1 mol of solid. Metals give hydrogen, carbonates give carbon dioxide and metal oxides give no gas. Aluminium forms Al³⁺ ions, so each aluminium atom releases enough electrons to make 1.5 H₂ molecules: 2Al + 6HCl → 2AlCl₃ + 3H₂.

Mark scheme
  1. 1 mark

    A / aluminium

    The only correct answer is A: 2Al + 6HCl → 2AlCl₃ + 3H₂, so 1 mol of aluminium produces 1.5 mol of hydrogen. B is not correct because calcium oxide is a base, so it forms only a salt and water (CaO + 2HCl → CaCl₂ + H₂O) and no gas. C is not correct because Mg + 2HCl → MgCl₂ + H₂, so 1 mol of magnesium produces only 1 mol of hydrogen. D is not correct because Na₂CO₃ + 2HCl → 2NaCl + H₂O + CO₂, so 1 mol of sodium carbonate produces only 1 mol of carbon dioxide. ALLOW the letter or the option. If more than one option is given, do not award the mark.

Question 2

2 marks

A student mixes 25.0 cm³ of dilute hydrochloric acid with 25.0 cm³ of sodium hydroxide solution. Both solutions have a concentration of 0.200 mol/dm³, and they react completely:

H⁺(aq) + OH⁻(aq) → H₂O(l)

Calculate the number of water molecules formed in the reaction.

The Avogadro constant is 6.02 × 10²³.

Model answer

Amount of H⁺ = 0.200 × (25.0 ÷ 1000) = 0.00500 mol
The amounts of H⁺ and OH⁻ are equal, and the ionic equation shows that 1 mol of H⁺ forms 1 mol of water, so 0.00500 mol of water forms.
Number of water molecules = 0.00500 × 6.02 × 10²³ = 3.01 × 10²¹

Explanation

Every neutralisation in solution is the same reaction between hydrogen ions and hydroxide ions, so the amount of water formed equals the amount of H⁺ (or OH⁻) that reacts. Convert the volume to dm³ before using the concentration, and do not add the two amounts together: each water molecule forms from one H⁺ ion and one OH⁻ ion.

Mark scheme
  1. 1 mark

    amount of H⁺ (= amount of water formed) = 0.200 × 25.0 ÷ 1000 = 0.00500 (mol); or a correct final answer of 3.01 × 10²¹ with no working

    An answer of 3.01 × 10²¹ with no working scores 2 marks. ALLOW 3.0 × 10²¹. ALLOW 1 mark for 6.02 × 10²¹ (the amounts of acid and alkali added together, 0.0100 mol). ALLOW 1 mark for 3.01 × 10²⁴ (volume not converted to dm³). Typed forms: ALLOW 3.01E21 or 3.01 × 10 to the power 21.

  2. 1 mark

    evaluation: 0.00500 × 6.02 × 10²³ = 3.01 × 10²¹

    IGNORE units (molecules).

Question 3

3 marks

A student adds marble chips, which are calcium carbonate, CaCO₃, to dilute sulfuric acid, H₂SO₄. The mixture fizzes at first, but the fizzing soon stops, even though plenty of marble chips and acid are left.

Calcium sulfate is only slightly soluble in water.

Write the balanced symbol equation for the reaction, and explain why the fizzing stops.

Model answer

CaCO₃ + H₂SO₄ → CaSO₄ + H₂O + CO₂
The calcium sulfate that forms is only slightly soluble, so it does not dissolve: it forms a solid layer on the surface of the marble chips. This layer stops the acid from reaching the calcium carbonate underneath, so the reaction stops and no more carbon dioxide is given off, even though there is plenty of marble and acid left.

Explanation

Acid + metal carbonate → salt + water + carbon dioxide, and sulfuric acid makes sulfate salts. Usually the salt dissolves and the reaction carries on, but calcium sulfate is only slightly soluble, so it coats the chips and cuts the acid off from the carbonate. This is why dilute hydrochloric acid, which forms soluble calcium chloride, is used to make carbon dioxide from marble chips.

Mark scheme
  1. 1 mark

    CaCO₃ + H₂SO₄ → CaSO₄ + H₂O + CO₂

    All formulae must be correct. IGNORE state symbols, but ALLOW CaSO₄(s).

  2. 1 mark

    the calcium sulfate (that forms) does not dissolve / stays as a solid, and forms a layer on / coats the (surface of the) marble chips

    ALLOW the insoluble salt forms a layer on the calcium carbonate. DO NOT ALLOW the marble chips or the acid are used up / the acid has been neutralised (the question says plenty of both are left).

  3. 1 mark

    the layer stops the acid reaching / reacting with the calcium carbonate (underneath), so no more carbon dioxide is made

    ALLOW the acid and the calcium carbonate can no longer come into contact.

Question 4

4 marks

A student makes zinc nitrate by adding excess zinc oxide to 50.0 cm³ of dilute nitric acid. The concentration of the acid is 0.800 mol/dm³.

ZnO + 2HNO₃ → Zn(NO₃)₂ + H₂O

Calculate the maximum mass of zinc nitrate, Zn(NO₃)₂, that can be made.

Give your answer to 3 significant figures.

Relative atomic mass (Ar): N = 14.0 O = 16.0 Zn = 65.4

Model answer

Moles of HNO₃ = 0.800 × (50.0 ÷ 1000) = 0.0400 mol
The zinc oxide is in excess, so all the acid reacts: 2 mol of HNO₃ give 1 mol of Zn(NO₃)₂
Moles of Zn(NO₃)₂ = 0.0400 ÷ 2 = 0.0200 mol
Mr of Zn(NO₃)₂ = 65.4 + 2 × (14.0 + 3 × 16.0) = 189.4
Mass = 0.0200 × 189.4 = 3.788 g = 3.79 g (3 significant figures)

Explanation

Because the zinc oxide is in excess, the acid is the limiting reactant and decides how much salt can form. Convert the volume to dm³ (50.0 cm³ = 0.0500 dm³) before multiplying by the concentration. The equation shows that 2 mol of nitric acid give only 1 mol of zinc nitrate, so halve the moles of acid. Common errors are missing this 2 : 1 ratio (7.58 g) and using the Mr of zinc oxide instead of zinc nitrate.

Mark scheme
  1. 1 mark

    moles of HNO₃ = 0.800 × 50.0 ÷ 1000 = 0.0400 (mol); or a correct final answer of 3.79 g with no working

    An answer of 3.79 g with no working scores 4 marks. ALLOW 3 marks for 3.788 g or 3.8 g (correct, but not to 3 significant figures). ALLOW 3 marks for 7.58 g (moles of acid not divided by 2: ECF). ALLOW 3 marks for 3790 g (volume not converted to dm³: ECF). ALLOW 3 marks for 1.63 g (the Mr of ZnO, 81.4, used instead of the Mr of zinc nitrate: ECF).

  2. 1 mark

    moles of Zn(NO₃)₂ = 0.0400 ÷ 2 = 0.0200 (mol); or a correct final answer of 3.79 g with no working

    ALLOW ECF from a wrong number of moles of acid.

  3. 1 mark

    Mr of Zn(NO₃)₂ = 65.4 + 2 × (14.0 + 3 × 16.0) = 189.4 and mass = 0.0200 × 189.4 = 3.788 (g); or a correct final answer of 3.79 g with no working

    ALLOW ECF from a wrong number of moles of zinc nitrate. DO NOT ALLOW this mark if the Mr is wrong.

  4. 1 mark

    evaluation: 3.79 (g)

    ALLOW ECF for the significant-figure mark from a valid calculation.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.