Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
Avg
score:
–
Topics
done:
0/26

Developing the atomic model

Practise 15 exam-style questions on Developing the atomic model for OCR GCSE Chemistry (Paper 3). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 15 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
15 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

Which two models of the atom include a nucleus?

Choose your answer.

  • A Dalton's model and Thomson's model
  • B Thomson's model and Rutherford's model
  • C Dalton's model and Bohr's model
  • D Rutherford's model and Bohr's model

Model answer

D

Explanation

Dalton's atoms (early 1800s) were solid spheres, and Thomson's plum pudding model (after he discovered electrons) was a sphere of positive charge with electrons spread through it. The nucleus first appears in Rutherford's model, which explained why a few alpha particles bounced back from gold foil. Bohr's model kept the nucleus and added shells.

Mark scheme
  1. 1 mark

    D / Rutherford's model and Bohr's model

    The only correct answer is D: Rutherford proposed the nucleus after the Geiger and Marsden experiment, and Bohr kept it when he put the electrons into shells. A is not correct because neither Dalton's solid sphere nor Thomson's plum pudding has a nucleus; B is not correct because Thomson's model has its positive charge spread through the whole atom; C is not correct because Dalton's atom is a solid sphere with no nucleus. ALLOW the letter or the two models. If more than one option is given, do not award the mark.

Question 2

2 marks

In 1897, J. J. Thomson discovered the electron. He then developed a new model of the atom, called the plum pudding model.

Give one way in which Thomson's model was similar to Dalton's model of the atom, and one way in which it was different.

Model answer

Similarity: both models show the atom as a sphere with no nucleus, with its mass spread through the whole atom.
Difference: Thomson's atom contains smaller particles (negative electrons in a sphere of positive charge), so it can be divided, but Dalton's atom is a solid sphere that cannot be divided.

Explanation

The discovery of the electron showed that atoms contain smaller particles, so Dalton's indivisible atom had to change. Thomson kept the idea of the atom as a sphere and added electrons, with positive charge spread through the sphere to balance them. Neither model had a nucleus: a common error is to give Thomson's model a nucleus.

Mark scheme
  1. 1 mark

    similarity, any one from: both show the atom as a (solid) sphere / ball; both have no nucleus; in both models the mass is spread through the whole atom

    1 mark for any one similarity. ALLOW both have no empty space inside the atom. ALLOW atoms of different elements are different in both models. IGNORE both are models of atoms / both are made by scientists (not features of the models).

  2. 1 mark

    difference, any one from: Thomson's atom contains smaller particles (electrons) / can be divided, but Dalton's atom cannot be divided; Thomson's atom contains positive and negative charges, but Dalton's atom has no charges

    1 mark for any one difference. ALLOW Thomson's model has negative electrons in a sphere of positive charge. ORA (allow the reverse argument). DO NOT ALLOW Thomson's model has a nucleus.

Question 3

2 marks

A scientist takes an image of the surface of a gold crystal using a scanning tunnelling microscope.

The image shows a straight row of 20 gold atoms. The atoms in the row are touching. The row is 5.8 × 10⁻⁹ m long.

Calculate the radius of a gold atom.

Give your answer in standard form.

Model answer

Diameter of one atom = 5.8 × 10⁻⁹ ÷ 20 = 2.9 × 10⁻¹⁰ m
Radius = 2.9 × 10⁻¹⁰ ÷ 2 = 1.45 × 10⁻¹⁰ m

Explanation

Twenty touching atoms in a row span twenty diameters, so divide the length by 20 to get one diameter, then halve it to get the radius. The answer agrees with the typical atomic radius of the order of 10⁻¹⁰ m. The most common error is to give the diameter instead of the radius.

Mark scheme
  1. 1 mark

    5.8 × 10⁻⁹ ÷ 20 (= 2.9 × 10⁻¹⁰ m, the diameter) / 5.8 × 10⁻⁹ ÷ 40; or a correct final answer of 1.45 × 10⁻¹⁰ m with no working

    An answer of 1.45 × 10⁻¹⁰ m (or 1.5 × 10⁻¹⁰ m or 1.4 × 10⁻¹⁰ m) with no working scores 2 marks. ALLOW 1 mark for 2.9 × 10⁻¹⁰ m (the diameter, not halved). ALLOW 1 mark for a correct value not in standard form (0.000 000 000 145 m or 0.145 nm).

  2. 1 mark

    1.45 × 10⁻¹⁰ (m) / 1.5 × 10⁻¹⁰ (m) / 1.4 × 10⁻¹⁰ (m)

    ALLOW typed forms such as 1.45 × 10-10, 1.45E-10 or 1.45 × 10 to the power -10.

Question 4

4 marks

A small cube of iron has sides 1.0 mm long.

The diameter of an iron atom is about 2.5 × 10⁻¹⁰ m.

A student models each iron atom as a tiny cube with sides equal to the diameter of an iron atom. The tiny cubes are packed in rows and layers to fill the cube of iron.

Estimate the number of iron atoms in the cube of iron.

Give your answer to 1 significant figure.

Model answer

Side of cube = 1.0 mm = 1.0 × 10⁻³ m
Atoms along one edge = 1.0 × 10⁻³ ÷ 2.5 × 10⁻¹⁰ = 4.0 × 10⁶
Number of atoms = (4.0 × 10⁶)³ = 6.4 × 10¹⁹
To 1 significant figure: 6 × 10¹⁹ atoms

Explanation

Put both lengths in the same unit first, then find how many atoms fit along one edge. The cube has that many atoms along its length, width and height, so cube the number. Common errors are forgetting to cube, using the radius instead of the diameter, and not converting mm to m. Even a cube smaller than a grain of sugar contains about 10²⁰ atoms, which shows how tiny atoms are.

Mark scheme
  1. 1 mark

    1.0 mm = 1.0 × 10⁻³ m; or a correct final answer of 6 × 10¹⁹ with no working

    An answer of 6 × 10¹⁹ with no working scores 4 marks. ALLOW the atom diameter converted to mm instead (2.5 × 10⁻⁷ mm).

  2. 1 mark

    number of atoms along one edge = 1.0 × 10⁻³ ÷ 2.5 × 10⁻¹⁰ = 4.0 × 10⁶; or a correct final answer of 6 × 10¹⁹ with no working

    ALLOW 4 000 000. ALLOW ECF from a wrong unit conversion.

  3. 1 mark

    number of atoms = (4.0 × 10⁶)³ = 6.4 × 10¹⁹; or a correct final answer of 6 × 10¹⁹ with no working

    ALLOW 4.0 × 10⁶ × 4.0 × 10⁶ × 4.0 × 10⁶. ALLOW ECF from a wrong number along one edge (for example using the radius gives 8.0 × 10⁶ and 5.12 × 10²⁰). An answer of 4 × 10⁶ (not cubed) scores marking points 1 and 2 only.

  4. 1 mark

    6 × 10¹⁹

    ALLOW ECF for the significant-figure mark from a valid calculation (for example 5 × 10²⁰ from using the radius). 6.4 × 10¹⁹ on its own scores 3 marks. ALLOW typed forms such as 6 × 10 to the power 19, 6 × 10 19 or 6E19.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.