Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
Avg
score:
–
Topics
done:
0/26

Pure substances and separating mixtures

Practise 15 exam-style questions on Pure substances and separating mixtures for Edexcel GCSE Combined Science (Chemistry Paper 1). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 15 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
15 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

Filtration is one method of separating mixtures.

Which mixture can be separated by filtration?

Choose your answer.

  • A sand and water
  • B ethanol and water
  • C salt and water
  • D the dyes in an ink

Model answer

A - sand and water.

Explanation

Filtration separates an insoluble solid from a liquid or a solution: the solid stays on the filter paper as the residue and the liquid passes through as the filtrate. Dissolved substances, and liquids that mix with each other, all pass through the paper, so filtration cannot separate them.

Mark scheme
  1. 1 mark

    A / sand and water (1)

    The only correct answer is A: sand is insoluble in water, so the sand stays on the filter paper while the water passes through. B is not correct because ethanol and water are both liquids that mix completely, so both pass through the filter paper (they are separated by fractional distillation); C is not correct because salt dissolves in water, so the dissolved salt passes through the paper with the water; D is not correct because the dyes are dissolved in the ink, so they pass through the paper (they are separated by paper chromatography). Accept the letter or the option. If more than one option is given, do not award the mark.

Question 2

2 marks

A student stirs a mixture of powdered chalk and salt with water. She then filters the mixture.

The chalk stays on the filter paper, but the salt passes through the filter paper.

Explain this difference.

Model answer

Chalk is insoluble in water, so it stays as solid grains that are too large to pass through the tiny holes in the filter paper, and it is left as the residue. Salt dissolves in water, so its particles (ions) are spread through the solution and are small enough to pass through the filter paper with the water into the filtrate.

Explanation

Filtration separates substances by whether they dissolve: insoluble solids are trapped as the residue, while dissolved substances pass through with the solvent in the filtrate. A common error is to say salt 'melts' in water - it dissolves.

Mark scheme
  1. 1 mark

    chalk is insoluble (in water), so its particles / pieces are too large to pass through (the holes / pores in) the filter paper (1)

    An explanation linking two points. Allow 'chalk does not dissolve, so it stays as solid grains that are too big to fit through the paper'. Ignore 'chalk is heavier'.

  2. 1 mark

    salt is soluble / dissolves (in water), so its particles / ions are small enough to pass through the filter paper (with the water) (1)

    Allow 'the salt is dissolved, so it goes through in the filtrate'. Do not accept 'the salt melts' or 'salt particles are absorbed by the paper'.

Question 3

3 marks

Potassium manganate(VII) solution is purple. It contains potassium manganate(VII), a solid, dissolved in water.

A teacher wants to obtain a sample of pure water from the solution.

Explain why simple distillation can be used to do this, but heating the solution in an evaporating basin cannot.

Model answer

When the solution is heated, the water boils and turns into water vapour, but the potassium manganate(VII) does not evaporate, so it stays behind. In simple distillation the water vapour passes into a condenser, where it is cooled and condenses back into liquid water, which is collected as pure (colourless) water. In an evaporating basin the water vapour simply escapes into the air, so no water is collected - only the solid is left.

Explanation

Simple distillation separates a liquid from a solution of a solid (or from substances with much higher boiling points): the liquid evaporates, is condensed and is collected. Evaporation also separates the solid, but the solvent is lost to the air, so it is only used when the solid is wanted. Saying only 'the water evaporates' does not explain how the water is collected.

Mark scheme
  1. 1 mark

    when the solution is heated, the water evaporates / boils but the potassium manganate(VII) does not (it stays in the flask / basin) (1)

    An explanation linking three points. Allow 'water has a much lower boiling point than potassium manganate(VII)'. Allow 'only the water turns into a vapour'.

  2. 1 mark

    in distillation the water vapour is cooled and condensed (in the condenser) and collected (as pure water) (1)

    Allow 'the steam turns back into a liquid in the condenser and drips into a beaker'. 'Condensed' or an equivalent idea is needed.

  3. 1 mark

    in an evaporating basin the water vapour escapes into the air / is lost (so no water is collected; only the solid is left) (1)

    Allow 'evaporation only gives the solid'. Do not accept 'evaporation removes the purple colour'.

Question 4

4 marks

A bag of potassium sulfate fertiliser has been contaminated with sand. Potassium sulfate is soluble in water. Sand is insoluble in water.

Describe how a student could obtain pure, dry crystals of potassium sulfate from the mixture.

Model answer

Add water to the mixture and stir (warming gently) until all of the potassium sulfate has dissolved. Filter the mixture: the sand stays on the filter paper and the potassium sulfate solution passes through as the filtrate. Heat the filtrate gently in an evaporating basin to evaporate some of the water until the solution is concentrated, then leave it to cool so that crystals of potassium sulfate form. Filter off the crystals and dry them between pieces of filter paper.

Explanation

The method uses the different solubilities: dissolve the soluble substance, filter off the insoluble one, then crystallise the soluble substance from the filtrate. The order matters - filtering must come before crystallisation. Heating the solution to dryness is not crystallisation and gives a powder rather than pure crystals.

Mark scheme
  1. 1 mark

    add water (and stir / warm) so the potassium sulfate dissolves (1)

    A description including any four from the six points; max 4. Do not accept 'dissolve the sand'.

  2. 1 mark

    filter the mixture (to remove the sand) (1)

    Allow 'pour through filter paper in a funnel; the sand is left on the paper'. If filtration comes after evaporation, do not award this point.

  3. 1 mark

    heat the filtrate / solution (gently) to evaporate some of the water (1)

    Allow 'heat until crystals start to form / until the solution is concentrated'. Allow 'use a water bath'. Do not accept 'heat until all the water has evaporated / to dryness'.

  4. 1 mark

    leave the (concentrated) solution to cool so that crystals form (1)

    Allow 'leave in a warm place / on a windowsill for the crystals to form'.

  5. 1 mark

    separate the crystals from the remaining solution, e.g. by filtering / pouring off the liquid (1)

    Allow 'remove the crystals with a spatula'.

  6. 1 mark

    dry the crystals, e.g. between filter papers / in a warm place / in a warm oven (1)

    Allow 'pat dry with filter paper'. Do not accept 'dry them by heating strongly'.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.