Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
Avg
score:
–
Topics
done:
0/25

The particle model

Practise 11 exam-style questions on The particle model for OCR GCSE Chemistry (Paper 1). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 11 questions
  • 1–4 marks each
  • Instant marking
  • No sign-up needed
11 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

A teacher shows a class two changes.

Change 1: Steam from a boiling kettle touches a cold window. Drops of liquid water form on the window.

Change 2: Ammonia gas and hydrogen chloride gas meet inside a glass tube. A white solid forms where they meet. The white solid is ammonium chloride.

Which row describes the two changes?

Choose your answer.

  • A Change 1 chemical, Change 2 chemical
  • B Change 1 chemical, Change 2 physical
  • C Change 1 physical, Change 2 chemical
  • D Change 1 physical, Change 2 physical

Model answer

C (Change 1 physical, Change 2 chemical)

Explanation

In both changes gases turn into something that is not a gas, so you have to ask whether a new substance is made. Steam condenses into liquid water: the water molecules are unchanged, so this is a physical change (a change of state). Ammonia and hydrogen chloride make ammonium chloride, a different substance, so their atoms have been rearranged: a chemical change.

Mark scheme
  1. 1 mark

    C / Change 1 physical, Change 2 chemical

    The only correct answer is C: in Change 1 the water molecules stay the same (steam condenses to liquid water), so it is a physical change; in Change 2 the atoms in the ammonia and hydrogen chloride particles are rearranged to make a new substance, ammonium chloride, so it is a chemical change. A is not correct because Change 1 makes no new substance; B is not correct because it has the two changes the wrong way round; D is not correct because Change 2 makes a new substance, even though it also starts with gases that form something more condensed. ALLOW the letter or the option. If more than one option is given, do not award the mark.

Question 2

2 marks

A student collects some carbon dioxide gas in a plastic syringe and seals the end. They can push the plunger a long way in, so the gas takes up a much smaller volume.

The student fills a second syringe with dilute hydrochloric acid and seals the end. They can hardly move the plunger at all.

Use the particle model to explain the difference.

Model answer

In the carbon dioxide gas the particles are far apart, with large spaces between them, so pushing the plunger moves them closer together. In the hydrochloric acid, a liquid, the particles are already close together and touching, so there is almost no space to push them into.

Explanation

Gases can be squashed (compressed) because their particles are far apart. Liquids and solids can hardly be squashed because their particles are already touching. The particles themselves do not get smaller: only the spaces between them change.

Mark scheme
  1. 1 mark

    (in the carbon dioxide / gas) the particles are far apart / there are large spaces between the particles, so they can be pushed closer together

    ALLOW 'there is a lot of space between gas particles' for this mark. DO NOT ALLOW 'the particles are squashed / get smaller' (CON). IGNORE references to the gas being lighter.

  2. 1 mark

    (in the acid / liquid) the particles are close together / touching / there is very little space between them, so they cannot be pushed (much) closer

    ALLOW 'the particles in a liquid are already touching' for this mark. ALLOW ORA (allow the reverse argument) for a comparison, for example 'the particles in the liquid are much closer together than the particles in the gas' scores this mark. IGNORE the idea that the liquid is denser.

Question 3

2 marks

A student makes a model of a small crystal of copper. They stick table-tennis balls together in layers to show the copper atoms.

The student draws the top layer of the model as seen from above. The drawing shows 6 rows of balls, with 7 balls in each row.

The model has 5 layers stacked on top of each other. Every layer is the same as the top layer.

Calculate the total number of balls in the model.

Model answer

Balls in one layer = 6 × 7 = 42
Total = 42 × 5 = 210 balls

Explanation

The flat drawing shows only the top layer, so first find the number of balls in that layer (6 × 7 = 42). The real model is three-dimensional, with 5 such layers, so multiply by 5: 42 × 5 = 210. A common slip is to give 42, the number in the drawing only.

Mark scheme
  1. 1 mark

    number of balls in one layer = 6 × 7 = 42 / 6 × 5 = 30 / 7 × 5 = 35; or a correct final answer of 210 with no working

    An answer of 210 with no working scores 2 marks. Any correct first multiplication of two of the three numbers scores this mark (6 × 5 and 7 × 5 are also correct first steps). DO NOT ALLOW methods that add the numbers (6 + 7 + 5 = 18 scores 0). An answer of 42 on its own (one layer only) scores 1 mark.

  2. 1 mark

    42 × 5 = 210 (balls)

    ALLOW 6 × 7 × 5 in any order. ALLOW ECF from an arithmetic slip in the first multiplication, multiplied correctly by the third number.

Question 4

3 marks

These two changes both make carbon dioxide gas.

Fire extinguisher: a fire extinguisher contains liquid carbon dioxide. When the extinguisher is used, the liquid comes out of the nozzle and turns into carbon dioxide gas.

Lime kiln: limestone (calcium carbonate) is heated strongly in a lime kiln. It breaks down:
calcium carbonate → calcium oxide + carbon dioxide

Explain, in terms of particles, why one of these changes is a physical change and the other is a chemical change.

Model answer

The fire extinguisher is a physical change. The carbon dioxide molecules are the same at the start and at the end, so no new substance is made. Only the arrangement and movement of the particles change: they go from close together in the liquid to far apart and moving quickly in the gas. The lime kiln is a chemical change: the atoms in the calcium carbonate are rearranged, as bonds break and new bonds form, to make new substances, calcium oxide and carbon dioxide.

Explanation

Making a gas does not tell you whether a change is physical or chemical: ask whether new substances are made. In the fire extinguisher the carbon dioxide molecules were there all along, and they just move apart as the liquid turns into a gas, which is a change of state. In the lime kiln the carbon dioxide is a new substance, made by rearranging the atoms of calcium carbonate, so this is a chemical change.

Mark scheme
  1. 1 mark

    the fire extinguisher is a physical change because the carbon dioxide particles / molecules are the same at the start and at the end / no new substance is made (it is carbon dioxide before and after)

    The fire extinguisher (the liquid turning into a gas) must be named as the physical change for this mark. ALLOW 'it is still carbon dioxide, so no new substance has formed'. DO NOT ALLOW 'it is physical because it is reversible' on its own.

  2. 1 mark

    (in the fire extinguisher) only the arrangement and movement of the particles change: they go from close together to far apart / moving quickly in all directions (as the liquid turns into a gas)

    ALLOW 'the particles spread out and move faster'. DO NOT ALLOW 'the particles get bigger / expand' (CON).

  3. 1 mark

    the lime kiln is a chemical change because the atoms in the calcium carbonate are rearranged / bonds break and new bonds form, to make new substances (calcium oxide and carbon dioxide)

    ALLOW 'the carbon dioxide was not there at the start: it is made from the atoms in the calcium carbonate'. DO NOT ALLOW 'it is chemical because it is heated' or 'because a gas is given off' on their own (both changes give a gas).

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.