Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
Avg
score:
–
Topics
done:
0/25

Formulations and separation techniques

Practise 17 exam-style questions on Formulations and separation techniques for OCR GCSE Chemistry (Paper 1). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 17 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
17 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

A student has a mixture of sand and blue copper sulfate solution. She pours the mixture into a filter funnel lined with filter paper.

Which substances are in the filtrate?

Choose your answer.

  • A sand and copper sulfate
  • B sand only
  • C water and copper sulfate
  • D water only

Model answer

C - water and copper sulfate

Explanation

Filtration separates an insoluble solid from a liquid. The insoluble sand is too large to pass through the filter paper and stays behind as the residue, but the dissolved copper sulfate passes through with the water, so the filtrate is still blue. To get the copper sulfate back from the filtrate, a different technique, such as crystallisation, is needed.

Mark scheme
  1. 1 mark

    C / water and copper sulfate

    The only correct answer is C: the filtrate is the liquid that passes through the filter paper; the copper sulfate is dissolved, so its particles are small enough to pass through with the water (the filtrate is still blue). A is not correct because the sand is insoluble and is trapped on the filter paper as the residue. B is not correct because the sand stays on the filter paper and is not in the filtrate. D is not correct because filtration cannot remove a dissolved substance, so the copper sulfate is still in the filtrate. ALLOW the letter or the option. If more than one option is given, do not award the mark.

Question 2

2 marks

Filter coffee is made by pouring hot water onto ground coffee in a paper filter. A brown liquid drips through the filter into a jug.

For this filtration, name the residue and the filtrate.

Model answer

The residue is the used coffee grounds left in the paper filter. The filtrate is the coffee drink, the brown liquid that drips into the jug.

Explanation

In filtration, the residue is the insoluble solid that stays on the filter paper and the filtrate is the liquid that passes through it. Hot water dissolves some substances from the coffee, which pass through the filter, so the filtrate is a solution, not pure water. The insoluble grounds are too large to pass through.

Mark scheme
  1. 1 mark

    residue: the (used / wet) coffee grounds

    ALLOW the ground coffee / the solid left in the filter paper / the insoluble parts of the coffee. DO NOT ALLOW the filter paper. If the residue and filtrate are the wrong way round, award 0 for both points.

  2. 1 mark

    filtrate: the coffee (drink) / the brown liquid in the jug

    ALLOW water with dissolved substances from the coffee / coffee solution. DO NOT ALLOW (hot) water alone.

Question 3

2 marks

A student uses simple distillation to collect water from a green solution of food colouring.

Use ideas about particles to explain what happens to the water:
• when it is heated in the flask
• when it reaches the condenser.

Model answer

In the flask, the water particles gain energy from the heating. They move faster and escape from the liquid, spreading out to form water vapour (a gas). In the condenser, the vapour is cooled, so the particles lose energy, slow down and come close together again, forming liquid water.

Explanation

Distillation is two changes of state: evaporation (boiling) in the flask and condensation in the condenser. When particles gain enough energy they overcome the forces holding them together in the liquid and become a gas; when they lose energy, the forces pull them close together again. The particles themselves do not change size, only how far apart they are and how fast they move.

Mark scheme
  1. 1 mark

    in the flask, the water particles gain energy / move faster and escape from the liquid (overcome the forces between them) to form a gas / vapour

    ALLOW the particles spread out / move far apart as the water evaporates / boils. DO NOT ALLOW the particles expand / get bigger. IGNORE the food colouring stays behind.

  2. 1 mark

    in the condenser, the particles lose energy / slow down and move close together (attract each other again) to form a liquid

    ALLOW the particles cool down and come together, so the vapour condenses. DO NOT ALLOW the particles shrink / freeze. IGNORE the water drips into the beaker.

Question 4

3 marks

In September 2021, E10 petrol became the standard petrol sold at filling stations in Great Britain. E10 petrol contains several different hydrocarbons, up to 10% ethanol by volume, and small amounts of additives. The amount of each substance is carefully controlled.

A driver puts 45 litres of E10 petrol into a car. Calculate the largest volume of ethanol that this petrol could contain.

Explain why E10 petrol is described as a formulation.

Model answer

Largest volume of ethanol = 10 ÷ 100 × 45 = 4.5 litres

E10 petrol is a mixture of different substances that are not chemically joined. It is a formulation because the substances are mixed in carefully controlled amounts, each with a job, to make a useful fuel for cars.

Explanation

Up to 10 % of the volume is ethanol, so the largest volume is 10 % of 45 litres, which is 4.5 litres. A formulation is a mixture designed as a useful product, in which each component is present in a measured amount and has a purpose. Many fuels, medicines, paints, cleaning products and alloys are formulations.

Mark scheme
  1. 1 mark

    4.5 (litres)

    An answer of 4.5 litres with no working scores marking point 1 only. ALLOW working such as 10 ÷ 100 × 45 / 45 × 0.1 / 45 ÷ 10 with the answer 4.5. ALLOW 4.5 dm³ / 4500 cm³. DO NOT ALLOW 40.5 litres (the volume that is not ethanol).

  2. 1 mark

    it is a mixture (of different substances that are not chemically joined)

    ALLOW it contains hydrocarbons, ethanol and additives mixed together. IGNORE it is not pure on its own.

  3. 1 mark

    the substances are mixed in measured / controlled amounts to make a useful product / each component has a particular job

    ALLOW the amounts are chosen to give the properties needed for a fuel. ALLOW it is designed for a particular use (to fuel cars).

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.