Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
Avg
score:
–
Topics
done:
0/25

State symbols and tests for gases

Practise 13 exam-style questions on State symbols and tests for gases for OCR GCSE Chemistry (Paper 1). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 13 questions
  • 1–4 marks each
  • Instant marking
  • No sign-up needed
13 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

Urea is a white solid that is used as a fertiliser. Its melting point is 133 °C. Urea also dissolves in water, and farmers can spray the solution onto crops.

Which shows the correct state symbols for molten urea and for urea dissolved in water?

Choose your answer.

  • A molten: (aq); dissolved: (l)
  • B molten: (l); dissolved: (aq)
  • C molten: (l); dissolved: (l)
  • D molten: (s); dissolved: (aq)

Model answer

B - molten: (l); dissolved: (aq)

Explanation

Molten means melted, so molten urea is a liquid, (l). When urea dissolves in water it forms an aqueous solution, so it is shown as (aq). The two are easy to mix up because both look like liquids: (l) is for a pure substance that has melted, and (aq) is for a substance dissolved in water.

Mark scheme
  1. 1 mark

    B / molten: (l); dissolved: (aq)

    The only correct answer is B: molten urea is a liquid, so it is shown as (l), and urea dissolved in water is an aqueous solution, so it is shown as (aq). A is not correct because it swaps the two symbols: (aq) means dissolved in water, not melted. C is not correct because a substance dissolved in water is shown as (aq), not (l), even though the solution is a liquid. D is not correct because molten means melted, so the urea is no longer a solid (s). ALLOW the letter or the option. If more than one option is given, do not award the mark.

Question 2

2 marks

A student writes five statements about the tests for gases.

P A glowing splint relights in oxygen.
Q Hydrogen turns limewater milky.
R Chlorine bleaches damp litmus paper.
S Carbon dioxide relights a glowing splint.
T Oxygen burns with a squeaky pop.

Give the letters of the two correct statements.

Model answer

P and R

Explanation

Each of the four gases has its own test: oxygen relights a glowing splint, hydrogen burns with a squeaky pop with a lighted splint, carbon dioxide turns limewater milky, and chlorine bleaches damp litmus paper. Statements Q, S and T each pair a test result with the wrong gas.

Mark scheme
  1. 1 mark

    P

    Max 1 if more than two letters are given. P is correct: a glowing splint relights in oxygen. ALLOW the statement written out instead of its letter. The letters can be given in either order.

  2. 1 mark

    R

    R is correct: chlorine bleaches damp (blue) litmus paper, which turns red and then white. Q is wrong because carbon dioxide, not hydrogen, turns limewater milky. S is wrong because oxygen, not carbon dioxide, relights a glowing splint. T is wrong because hydrogen, not oxygen, burns with a squeaky pop.

Question 3

2 marks

A student is given a stoppered test tube of gas with the label 'chlorine'. To check the label, she holds a strip of dry blue litmus paper in the gas. Nothing happens to the paper.

She decides that the gas cannot be chlorine.

Explain why her decision is not valid, and describe how the test should be done.

Model answer

Chlorine only bleaches litmus paper when the paper is damp, so the dry paper was not a proper test and the result does not show that the gas is not chlorine. She should wet the blue litmus paper with water and hold it in the gas. If the gas is chlorine, the paper turns red and then white because it is bleached.

Explanation

The test for chlorine uses damp litmus paper: the chlorine dissolves in the water on the paper, and the solution bleaches it. With dry paper, chlorine gives no change, so the student's result cannot rule chlorine out. A decision based on a test is only valid if the test was carried out correctly.

Mark scheme
  1. 1 mark

    the litmus paper must be damp / wet for the test to work, so dry paper not changing colour does not show that the gas is not chlorine

    ALLOW chlorine does not bleach dry litmus paper. ALLOW the test was not done correctly because the paper was dry. IGNORE 'the student should repeat the test' on its own.

  2. 1 mark

    use damp / wet (blue) litmus paper: it turns red and then white / is bleached if the gas is chlorine

    Both the damp paper and the result are needed for this mark. ALLOW the paper turns white / loses its colour. DO NOT ALLOW 'turns red' on its own (other gases that form acids can do this). DO NOT ALLOW a test with limewater or a splint.

Question 4

3 marks

A technician has two test tubes of colourless gas. One contains oxygen and the other contains carbon dioxide, but the labels have come off.

Describe a test the technician could do on the gas in each tube to find out which tube contains oxygen. Give the result for each gas.

Model answer

Put a glowing splint into the gas in each tube. In the tube of oxygen, the glowing splint relights. In the tube of carbon dioxide, the splint does not relight: it goes out. So the tube in which the splint relights contains oxygen.

Explanation

One test is enough if it gives a different result with each gas. The glowing splint test relights in oxygen only, and the limewater test turns milky with carbon dioxide only, so either test works. Always give the result for both gases, so that the technician knows which tube is which.

Mark scheme
  1. 3 marks

    ANY ONE test, with its result for each gas:
    glowing splint test: put a glowing splint into (the gas in) each tube; oxygen: the splint relights; carbon dioxide: the splint goes out / does not relight
    OR limewater test: bubble (or shake) the gas from each tube with limewater; oxygen: the limewater stays colourless / does not change; carbon dioxide: the limewater turns milky / cloudy
    OR lighted splint test: hold a lighted splint in each tube; oxygen: the splint burns more brightly; carbon dioxide: the splint goes out

    1 mark for the test, 1 mark for the result with oxygen and 1 mark for the result with carbon dioxide, max 3. The two results must be for the test that is described. If more than one test is described, a wrong test or result cancels a right one. ALLOW the results given as which tube is which (for example 'the tube in which the splint relights contains oxygen'). ALLOW the limewater goes cloudy white / chalky. DO NOT ALLOW oxygen turns limewater milky. DO NOT ALLOW a squeaky pop as the result for either gas.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.