Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
Avg
score:
–
Topics
done:
0/25

Energetics

Practise 14 exam-style questions on Energetics for OCR GCSE Chemistry (Paper 1). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 14 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
14 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

On the reaction profile for a reaction:

• the reactants are at 50 kJ
• the highest point of the curve is at 170 kJ
• the products are at 90 kJ.

Which value is the activation energy?

Choose your answer.

  • A 40 kJ
  • B 50 kJ
  • C 80 kJ
  • D 120 kJ

Model answer

D - 120 kJ

Explanation

On a reaction profile, the activation energy is measured from the energy of the reactants up to the top of the curve: 170 − 50 = 120 kJ. The energy change is measured from the reactants to the products: 90 − 50 = +40 kJ, so this reaction is endothermic. Measuring the activation energy from the products gives the wrong value of 80 kJ.

Mark scheme
  1. 1 mark

    D / 120 kJ

    The only correct answer is D: the activation energy is the energy from the reactants up to the top of the curve, 170 − 50 = 120 kJ. A is not correct because 40 kJ (90 − 50) is the energy change of the reaction. B is not correct because 50 kJ is the energy of the reactants, not the energy needed to start the reaction. C is not correct because 80 kJ (170 − 90) is measured from the products, not from the reactants. ALLOW the letter or the option. If more than one option is given, do not award the mark.

Question 2

2 marks

A teacher pours a little water onto a wooden board and stands a beaker in the puddle. She puts two solids, barium hydroxide and ammonium chloride, into the beaker and stirs them. The solids react.

After a few minutes, the water under the beaker has frozen, and the beaker is stuck to the board.

Explain why the water freezes.

Model answer

The reaction is endothermic, so it takes in energy from its surroundings. Energy is transferred from the beaker and the water under it into the reacting solids. This makes the temperature of the water fall to 0 °C or below, so the water freezes.

Explanation

An endothermic reaction takes in energy from its surroundings, so the surroundings get colder. Here the reaction takes in so much energy that the water under the beaker cools below its freezing point. The reaction does not give out 'cold': energy moves from the water into the reaction.

Mark scheme
  1. 1 mark

    the reaction is endothermic / takes in energy (heat)

    ALLOW the reaction absorbs heat. DO NOT ALLOW exothermic.

  2. 1 mark

    energy is taken in from the surroundings / from the beaker and the water under it, so the temperature of the water falls to 0 °C or below / to its freezing point

    ALLOW heat moves from the water into the reaction mixture, so the water gets cold enough to freeze. DO NOT ALLOW the reaction gives out cold / cold energy.

Question 3

2 marks

A student compares two reactions that could be used to warm a drink.

• Reaction X releases 4.2 kJ of energy.
• Reaction Y releases 3600 J of energy.

1 kJ = 1000 J

Which reaction releases more energy? Explain your answer by comparing the two energies in the same unit.

Model answer

4.2 kJ = 4.2 × 1000 = 4200 J. 4200 J is more than 3600 J, so reaction X releases more energy.

Explanation

Two energies can only be compared when they are in the same unit. Converting kJ to J means multiplying by 1000, so 4.2 kJ is 4200 J, which is more than 3600 J. Comparing the numbers 4.2 and 3600 without converting gives the wrong answer.

Mark scheme
  1. 1 mark

    4.2 kJ = 4200 J / 3600 J = 3.6 kJ

    ALLOW either conversion. ALLOW 4200 J is more than 3600 J. DO NOT ALLOW 4.2 kJ = 420 J or 3600 J = 36 kJ.

  2. 1 mark

    reaction X (releases more energy)

    This mark can only be given if the two energies are compared in the same unit (point 1). DO NOT ALLOW Y (3600 looks bigger than 4.2 only because the units are different).

Question 4

4 marks

A student is drawing a reaction profile for a reaction on an energy scale.

• The energy of the reactants is 120 kJ.
• The activation energy is 75 kJ.
• The energy change for the reaction is −50 kJ.

Calculate the energy at the top of the curve and the energy of the products.

Explain whether the temperature of the surroundings rises or falls during the reaction.

Model answer

Energy at the top of the curve = 120 + 75 = 195 kJ
Energy of the products = 120 − 50 = 70 kJ

The products (70 kJ) are lower in energy than the reactants (120 kJ), and the energy change is negative, so the reaction is exothermic. Energy is given out to the surroundings, so the temperature of the surroundings rises.

Explanation

Both the activation energy and the energy change are measured from the reactants' level. So the top of the curve is 75 kJ above 120 kJ, and the products are 50 kJ below 120 kJ, because the energy change is negative. A negative energy change means the reaction gives out energy, so the surroundings get warmer.

Mark scheme
  1. 1 mark

    energy at the top of the curve = 120 + 75 = 195 (kJ); or a correct final answer of 195 kJ with no working

    An answer of 195 kJ (top of the curve) and 70 kJ (products) with no working scores marking points 1 and 2 only. DO NOT ALLOW 75 kJ (the activation energy is measured up from the reactants, not from zero) or 45 kJ (120 − 75).

  2. 1 mark

    energy of the products = 120 − 50 = 70 (kJ); or a correct final answer of 70 kJ with no working

    DO NOT ALLOW 170 kJ (the energy change added instead of subtracted) or 145 kJ (195 − 50, measured from the top of the curve).

  3. 1 mark

    the products are lower in energy than the reactants / the energy change is negative, so the reaction is exothermic

    ALLOW ECF: endothermic, if the products were calculated in point 2 to be higher in energy than the reactants.

  4. 1 mark

    energy is transferred / given out to the surroundings, so the temperature of the surroundings rises

    ALLOW ECF: energy is taken in from the surroundings, so the temperature falls, if the reaction was identified as endothermic in point 3. DO NOT ALLOW the temperature rises because energy is taken in.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.