Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
Avg
score:
–
Topics
done:
0/24

Predicting reactions from the Periodic Table

Practise 13 exam-style questions on Predicting reactions from the Periodic Table for OCR GCSE Combined Science (Chemistry Paper 10). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 13 questions
  • 1–5 marks each
  • Instant marking
  • No sign-up needed
13 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

Nitrogen and phosphorus are both in Group 5. Magnesium and calcium are both in Group 2.

Magnesium reacts with nitrogen to form magnesium nitride, Mg₃N₂.

What is the most likely formula of the compound formed when calcium reacts with phosphorus?

Choose your answer.

  • A Ca₃P₂
  • B Ca₂P₃
  • C CaP
  • D CaP₂

Model answer

A

Explanation

Elements in the same group have the same number of outer electrons, so they form ions with the same charge and compounds with the same type of formula. You can predict calcium phosphide from magnesium nitride without working out any charges, but the charges (2+ and 3−) confirm it: 3 × (+2) + 2 × (−3) = 0.

Mark scheme
  1. 1 mark

    A / Ca₃P₂

    A is correct: calcium is in the same group as magnesium and phosphorus is in the same group as nitrogen, so their atoms gain or lose the same numbers of electrons (Ca²⁺ and P³⁻) and the compound has the same type of formula, Ca₃P₂. B is not correct because the numbers have been swapped (it does not balance the charges: 2 × 2+ and 3 × 3−); C is not correct because a 1 : 1 formula would need ions with equal and opposite charges; D is not correct because it copies the pattern of calcium chloride, CaCl₂, but phosphorus is in Group 5, not Group 7. ALLOW the letter or the formula. If more than one option is given, do not award the mark.

Question 2

1 mark

Caesium reacts with fluorine.

Use the positions of caesium and fluorine in the Periodic Table to predict the type of bonding in the product and its state at room temperature.

Model answer

Caesium is a metal in Group 1 and fluorine is a non-metal in Group 7, so caesium atoms lose an electron and fluorine atoms gain one: the product, caesium fluoride, is ionic. It has a giant ionic lattice with strong forces between the ions, so it is a solid at room temperature.

Explanation

A metal from Group 1 and a non-metal from Group 7 react by electron transfer to form an ionic compound, like sodium chloride. Ionic compounds have high melting points because of the strong electrostatic forces between oppositely charged ions in the lattice (C2.3), so they are solids at room temperature.

Mark scheme
  1. 1 mark

    ionic bonding (Cs⁺ and F⁻ ions, because caesium is a Group 1 metal and fluorine is a Group 7 non-metal), so it is a solid (with a high melting point)

    Both the ionic bonding and the solid state are needed. ALLOW giant ionic lattice. DO NOT ALLOW covalent / molecules / gas.

Question 3

3 marks

Use the Periodic Table to predict what would happen in each of these experiments. If you predict a reaction, name the products.

Experiment 1: Caesium is lowered into a gas jar of bromine vapour.
Experiment 2: Iodine solution is added to sodium astatide solution.
Experiment 3: Chlorine water is added to potassium fluoride solution.

Model answer

Experiment 1: caesium is a very reactive Group 1 metal and bromine is a halogen, so they react to form caesium bromide.
Experiment 2: iodine is above astatine in Group 7, so it is more reactive and displaces astatine. The products are sodium iodide and astatine.
Experiment 3: chlorine is below fluorine in Group 7, so it is less reactive and cannot displace fluorine. There is no reaction.

Explanation

Group 1 metals react with all the halogens to form metal halides. In Group 7, a halogen displaces any halogen below it from a solution of its halide, but not a halogen above it. These rules apply to astatine even though few people have ever worked with it.

Mark scheme
  1. 1 mark

    experiment 1: a reaction happens, producing caesium bromide

    ALLOW CsBr. DO NOT ALLOW caesium bromine.

  2. 1 mark

    experiment 2: a reaction happens, producing sodium iodide and astatine

    Both products are needed. ALLOW NaI and At₂. ALLOW iodine displaces astatine, if both products are named.

  3. 1 mark

    experiment 3: no reaction (chlorine is less reactive than fluorine)

    DO NOT ALLOW chlorine displaces fluorine / potassium chloride and fluorine form.

Question 4

4 marks

A scientist has samples of four elements: potassium, calcium, bromine and krypton.

Use the Periodic Table to predict which pairs of these elements would react with each other. Give the formula of the product of each reaction you predict. Explain your predictions, including why the other pairs would not react.

Model answer

Potassium and bromine react to form potassium bromide, KBr.
Calcium and bromine react to form calcium bromide, CaBr₂.
These react because the metal atoms lose electrons (one from potassium, two from calcium) and the bromine atoms gain them, forming ionic compounds.

Potassium and calcium do not react with each other: both are metals and both tend to lose electrons, so neither can take electrons from the other.
Krypton does not react with any of them: it is a noble gas with a full outer shell.

Explanation

Look at where each element is: potassium (Group 1) and calcium (Group 2) are metals that lose electrons, bromine (Group 7) gains electrons, and krypton (Group 0) does nothing. A reaction needs one element that loses electrons and one that gains them. The formulae follow from the charges: K⁺ with Br⁻ gives KBr; Ca²⁺ with two Br⁻ gives CaBr₂.

Mark scheme
  1. 1 mark

    potassium and bromine react, forming KBr

    Max 4. Max 3 if any pair that would not react is predicted to react. The pair and the correct formula are both needed for each of points 1 and 2.

  2. 1 mark

    calcium and bromine react, forming CaBr₂

    DO NOT ALLOW CaBr or Ca₂Br.

  3. 1 mark

    krypton does not react with any of the other elements, because it is a noble gas / has a full outer shell

    The reason is needed for this mark.

  4. 1 mark

    potassium and calcium do not react with each other, because they are both metals / both lose electrons

    ALLOW they would only mix (to form an alloy) and not form a compound.

  5. 1 mark

    Group 1 and Group 2 metals react with Group 7 non-metals, because the metal atoms lose electrons and the halogen atoms gain them (forming ionic compounds)

    A further creditworthy point (Max 4 in all).

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.