Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
Avg
score:
–
Topics
done:
0/24

Extracting metals using carbon

Practise 14 exam-style questions on Extracting metals using carbon for OCR GCSE Combined Science (Chemistry Paper 10). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 14 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
14 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

Zinc oxide is an ionic compound made of zinc ions, Zn²⁺, and oxide ions, O²⁻. In a furnace, zinc oxide is reduced by carbon to form zinc metal.

What happens to each zinc ion when it forms a zinc atom?

Choose your answer.

  • A It gains one electron.
  • B It gains two electrons.
  • C It loses one electron.
  • D It loses two electrons.

Model answer

B

Explanation

Reduction can be described as loss of oxygen or as gain of electrons. When zinc oxide loses its oxygen, each Zn²⁺ ion gains two electrons and becomes a neutral zinc atom: Zn²⁺ + 2e⁻ → Zn. The charge on the ion tells you how many electrons are needed.

Mark scheme
  1. 1 mark

    B / It gains two electrons.

    The only correct answer is B: a Zn²⁺ ion has two electrons fewer than a zinc atom, so it must gain two electrons to form an atom (Zn²⁺ + 2e⁻ → Zn); gain of electrons is reduction. A is not correct because gaining one electron would give a Zn⁺ ion, not an atom; C and D are not correct because losing electrons would make the ion more positive (oxidation), not form a neutral atom. ALLOW the letter or the option. If more than one option is given, do not award the mark.

Question 2

2 marks

Magnetite is an iron ore that contains the oxide Fe₃O₄. In a blast furnace, carbon monoxide, CO, reduces this oxide to iron. Carbon dioxide is the other product.

Write the balanced symbol equation for this reaction.

Model answer

Fe₃O₄ + 4CO → 3Fe + 4CO₂

Explanation

Each CO molecule takes one oxygen atom from the oxide and becomes CO₂. Fe₃O₄ has four oxygen atoms, so four CO molecules are needed, and three iron atoms are formed. Check by counting atoms: 3 Fe, 8 O and 4 C on each side.

Mark scheme
  1. 1 mark

    correct formulae: Fe₃O₄ + CO → Fe + CO₂

    ALLOW formulae typed without subscripts, for example Fe3O4 and CO2. IGNORE state symbols.

  2. 1 mark

    balancing: Fe₃O₄ + 4CO → 3Fe + 4CO₂

    The balancing mark depends on the correct formulae. ALLOW any correct multiple. ALLOW = instead of →. DO NOT ALLOW 'and' or '&' instead of +.

Question 3

3 marks

Tin is extracted from an ore called cassiterite. The ore contains tin(IV) oxide, SnO₂, together with small amounts of iron(III) oxide and aluminium oxide.

The ore is heated with carbon in a furnace. The tin(IV) oxide is reduced to tin, and carbon monoxide is formed.

Write the balanced symbol equation for the reduction of tin(IV) oxide by carbon.

The tin from the furnace contains some iron, but no aluminium. Explain why. Use the reactivity series.

Model answer

SnO₂ + 2C → Sn + 2CO

Iron is below carbon in the reactivity series, so the carbon reduces the iron(III) oxide as well as the tin(IV) oxide. The iron formed mixes with the molten tin. Aluminium is above carbon, so carbon cannot remove the oxygen from aluminium oxide: it stays as aluminium oxide and no aluminium is formed.

Explanation

Carbon reduces the oxide of any metal below it in the reactivity series, so it cannot tell the difference between tin(IV) oxide and iron(III) oxide: both are reduced. Aluminium oxide is not reduced because aluminium is more reactive than carbon. Compare the metal with carbon, not the metal oxide: 'aluminium oxide is more reactive than carbon' is not correct.

Mark scheme
  1. 1 mark

    SnO₂ + 2C → Sn + 2CO

    ALLOW any correct multiple. IGNORE state symbols. DO NOT ALLOW SnO₂ + C → Sn + CO₂, because the question says carbon monoxide is formed.

  2. 1 mark

    iron is below carbon / less reactive than carbon, so carbon also removes oxygen from / reduces the iron(III) oxide, and this iron mixes with the tin

    ALLOW carbon is more reactive than iron. The reduction of the iron(III) oxide by carbon must be stated or clearly implied.

  3. 1 mark

    aluminium is above carbon / more reactive than carbon, so carbon cannot remove oxygen from / reduce the aluminium oxide (it stays as aluminium oxide)

    ALLOW carbon is less reactive than aluminium. DO NOT ALLOW aluminium oxide is more reactive than carbon.

Question 4

5 marks

In a blast furnace, the overall reaction that turns iron(III) oxide into iron can be shown as:

2Fe₂O₃ + 3C → 4Fe + 3CO₂

Calculate the mass of carbon dioxide, in tonnes, produced by this reaction when 1.00 tonne of iron is made.

Relative atomic mass (Ar): C = 12.0 O = 16.0 Fe = 55.8
1 tonne = 1 000 000 g

A steel company estimates that its blast furnace releases about 1.5 tonnes of carbon dioxide for each tonne of iron made.

Suggest two reasons why this is more than your calculated value.

Model answer

Amount of iron = 1 000 000 g ÷ 55.8 = 17 921 mol
From the equation, 4 mol of Fe are made with 3 mol of CO₂, so amount of CO₂ = 17 921 × 3 ÷ 4 = 13 441 mol
Mr of CO₂ = 12.0 + (2 × 16.0) = 44.0
Mass of CO₂ = 13 441 × 44.0 = 591 000 g = 0.59 tonnes

The real value is higher because extra coke is burned in the hot air as a fuel to keep the furnace hot, and this also makes carbon dioxide. Also, the carbon monoxide in the waste gas is burned to heat the air blast, and fossil fuels are used to make the coke and run the plant, which all release more carbon dioxide.

Explanation

Use the mole ratio of iron to carbon dioxide in the equation (4 : 3), not a 1 : 1 ratio. The calculation only counts the carbon used to remove oxygen from the ore, but in a real blast furnace carbon is also the fuel that keeps the furnace hot, so the real emissions are much higher. This is one reason why making iron and steel releases so much carbon dioxide.

Mark scheme
  1. 1 mark

    amount of iron = 1 000 000 ÷ 55.8 = 17 921 (mol); or a correct final answer of 0.59 tonnes with no working

    An answer of 0.59 tonnes (or 0.591 tonnes) with no working scores marking points 1 to 3. ALLOW 17 900 or 1.79 × 10⁴ mol. ALLOW the mass-ratio route: 4 × 55.8 = 223.2 tonnes of iron is made with 3 × 44.0 = 132.0 tonnes of carbon dioxide, so 1.00 × 132.0 ÷ 223.2 (this scores marking points 1 and 2).

  2. 1 mark

    amount of carbon dioxide = 17 921 × 3 ÷ 4 = 13 441 (mol); or a correct final answer of 0.59 tonnes with no working

    ALLOW 13 400 or 1.34 × 10⁴ mol. ALLOW ECF from a wrong amount of iron.

  3. 1 mark

    evaluation: 13 441 × 44.0 = 591 000 g = 0.59 (tonnes)

    ALLOW 0.591 tonnes. ALLOW 0.590 tonnes (from 13 400 × 44.0 = 589 600 g). ALLOW 591 000 g or 591 kg if the unit is given. ALLOW ECF from a wrong amount of carbon dioxide shown in the working: for example 0.79 tonnes (ratio 1 : 1 used) scores marking points 1 and 3.

  4. 2 marks

    any two of these reasons: extra coke is burned (in the hot air) as a fuel to keep the furnace hot, which also makes carbon dioxide; the waste gas containing carbon monoxide is burned (to heat the air), forming more carbon dioxide; fossil fuels are burned to provide energy for other parts of the process (for example heating the air, pumps, making coke, transporting the ore); limestone (calcium carbonate) added to the furnace decomposes and releases carbon dioxide; the coke is not pure carbon and not all of it is used to reduce the iron oxide

    1 mark for each different reason, max 2. Each reason must explain where extra carbon dioxide comes from. IGNORE 'the reaction is not complete' or 'some iron is lost', which would not increase the carbon dioxide made for each tonne of iron.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.