Question 1
1 markAma is investigating how the current in a fixed resistor changes with the potential difference across it. Her school has no variable resistors left.
Suggest one other way Ama could change the potential difference across the resistor.
Model answer
Ama could use a variable power supply and change its voltage setting, or change the number of cells in the battery.
Explanation
The variable resistor is only one way of changing the potential difference across the component being tested. A variable power supply or a battery with more or fewer cells does the same job, as does putting different fixed resistors in series with the test resistor. Replacing the test resistor itself is not acceptable, because then a different component is being investigated.
Mark scheme
-
1 mark
use a variable (d.c.) power supply / change the voltage setting of the power supply (1)
Any one from this point and the two that follow; max 1. Accept 'use a power pack with different voltage settings'.
-
1 mark
change the number of cells (in the battery) (1)
accept 'add or remove cells', 'use different numbers of batteries'.
-
1 mark
connect different fixed resistors in series with the resistor being tested (1)
accept 'add a fixed resistor in series'. Do not accept 'use a potentiometer' or 'use a rheostat' (these are variable resistors). Do not accept 'use a different resistor' or 'change the resistor' (that changes the component being investigated). Ignore 'change the current' with no method.