Level:
Correct: 0
Incorrect: 0
Marks: 0/0

Energy stores, transfers and conservation

Practise 15 exam-style questions on Energy stores, transfers and conservation for OCR GCSE Combined Science (Physics Paper 12). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 15 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
15 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

In a sorting office, a parcel slides down a sloping metal chute. Friction acts on the parcel, and it slides down at a constant speed.

Which statement describes the changes in the energy stores while the parcel slides down the chute?

Choose your answer.

  • A kinetic store increases and gravitational potential store decreases
  • B kinetic store increases and thermal store decreases
  • C thermal store increases and kinetic store decreases
  • D thermal store increases and gravitational potential store decreases

Model answer

D

The parcel moves down, so its gravitational potential store decreases. Its speed is constant, so its kinetic store does not change. Work done by friction transfers the energy to the thermal stores of the parcel, chute and surroundings.

Explanation

At a constant speed the kinetic store does not change, so all of the energy leaving the gravitational potential store must go somewhere else: friction does work and transfers it to thermal stores (the parcel and chute warm up very slightly). Option A would be right only on a frictionless chute, where the parcel would speed up. Always check the speed: constant speed means no change in the kinetic store.

Mark scheme
  1. 1 mark

    D / thermal store increases and gravitational potential store decreases

    The only correct answer is D: the parcel loses height, so its gravitational potential store decreases; its speed is constant, so its kinetic store does not change; friction does work on the parcel, so the energy is transferred to the thermal stores of the parcel, the chute and the surroundings. A is not correct because the speed is constant, so the kinetic store does not increase (it would only increase if there were no friction); B is not correct because the kinetic store does not change and the thermal store gains energy rather than losing it; C is not correct because the kinetic store stays the same at a constant speed. ALLOW the letter or the option. If more than one option is given, do not award the mark.

Question 2

2 marks

Some homes with solar panels store spare energy in a large, insulated tank of water. When the solar panels produce more electricity than the home needs, an electric heater in the tank heats the water. In the evening, energy from the hot water is used to heat the home.

Water has a high specific heat capacity, and the tank holds a large mass of water.

Explain why this lets the tank store a large amount of energy without the water becoming very hot.

Model answer

Water has a high specific heat capacity, so each kilogram of water stores a lot of energy for each 1 °C rise in temperature. The tank also holds a large mass of water, so the energy is shared between many kilograms. Because change in thermal energy = m × c × Δθ, a large m and a large c mean that a large amount of energy can be stored in the thermal store of the water with only a small rise in temperature, so the water does not become very hot.

Explanation

The change in thermal energy depends on the mass, the specific heat capacity and the temperature change. Making m and c large means a big energy change for a small Δθ, which keeps the water at a safe temperature and reduces energy loss to the surroundings. A common error is to say that a high specific heat capacity makes water heat up quickly: it is the opposite.

Mark scheme
  1. 1 mark

    (high specific heat capacity means) each kilogram of water needs / stores a large amount of energy for each 1 °C rise in temperature

    ALLOW a lot of energy is needed to raise the temperature of 1 kg of water by 1 °C. ALLOW ORA (allow the reverse argument): a liquid with a low specific heat capacity would need less energy to warm each kilogram by 1 °C. DO NOT ALLOW water has a high specific heat capacity so it heats up quickly (contradiction). IGNORE references to the insulation of the tank.

  2. 1 mark

    (large mass means) the energy is shared between many kilograms, so a large amount of energy causes only a small rise in temperature

    ALLOW use of change in thermal energy = mass × specific heat capacity × change in temperature to argue that a large mass and a large specific heat capacity give a small change in temperature for a large energy change. IGNORE 'the water does not get very hot' on its own (this repeats the question).

Question 3

2 marks

At a go-kart track, some barriers are walls of old car tyres. Other barriers are made of foam blocks, which stay squashed after a go-kart crashes into them.

A go-kart that hits a tyre wall bounces back from it. A go-kart that hits a foam barrier at the same speed stops and does not bounce back.

Explain this difference. Use ideas about deformation and energy stores in your answer.

Model answer

When a go-kart hits the tyres, they deform elastically. Energy is transferred from the kinetic store of the go-kart to the elastic potential store of the tyres, and as the tyres spring back to their original shape most of this energy is transferred back to the kinetic store of the go-kart, so it bounces back. The foam deforms plastically: it stays squashed, so the energy is not returned to the go-kart. Instead it is transferred to the thermal store of the foam and the surroundings, so the go-kart stops.

Explanation

An elastically deformed object stores energy in its elastic potential store and can give it back when it returns to its shape; a plastically deformed object does not return to its shape, so the work done in deforming it ends up in thermal stores. Answers need to link each type of deformation to where the energy goes.

Mark scheme
  1. 1 mark

    the tyres deform elastically: energy from the kinetic store of the go-kart goes into the elastic potential store of the tyres, and (much of it) is transferred back to the kinetic store of the go-kart as the tyres return to their original shape

    The idea that the tyres deform elastically / return to their original shape and the elastic potential store are both needed. ALLOW some energy is also transferred to thermal stores, so the go-kart bounces back more slowly than it arrived.

  2. 1 mark

    the foam deforms plastically / does not return to its original shape, so the energy is not transferred back to the kinetic store but goes to the thermal store of the foam (and surroundings)

    ALLOW the energy is dissipated / transferred to the surroundings for thermal store. IGNORE sound. DO NOT ALLOW the foam destroys the energy.

Question 4

4 marks

A student fills a kettle with 0.75 kg of water at 16 °C and switches it on. A joulemeter measures the energy transferred to the kettle from the mains supply. When the water reaches 100 °C, the joulemeter reading is 294 000 J.

Specific heat capacity of water = 4200 J/kg °C

Use the equation: change in thermal energy = mass × specific heat capacity × change in temperature

The student says, 'The kettle has destroyed some of the energy that it was given.'

Use a calculation to explain why the student is wrong, and describe what happens to the energy that does not go into the water.

Model answer

Increase in the thermal store of the water = 0.75 × 4200 × (100 − 16) = 264 600 J
Energy that did not go into the water = 294 000 − 264 600 = 29 400 J

Energy cannot be created or destroyed, so the 29 400 J has not been destroyed: it has been transferred to other stores, and the total is still 294 000 J. Energy is transferred electrically to the heating element and then by heating to the water, but some of it heats the kettle itself (the element and the plastic body), increasing their thermal stores, and some is transferred by heating to the thermal store of the surrounding air.

Explanation

Work out the energy that reached the water with the equation given, then subtract it from the joulemeter reading. The law of conservation of energy says the difference must still exist in other stores: here the thermal stores of the kettle and the air. 'Wasted' energy is still energy; it is just spread out in less useful stores.

Mark scheme
  1. 1 mark

    change in thermal energy of the water = 0.75 × 4200 × 84 (= 264 600 J); or a correct final answer of 29 400 J with no working

    A value of 29 400 J for the energy that does not go into the water, with no working, scores marking points 1 and 2. ALLOW 0.75 × 4200 × (100 − 16). ALLOW 264.6 kJ / 265 000 J.

  2. 1 mark

    energy not transferred to the water = 294 000 − 264 600 = 29 400 (J)

    ALLOW 29 kJ / 29.4 kJ. ALLOW ECF from an incorrect change in thermal energy of the water.

  3. 1 mark

    energy cannot be destroyed (conservation of energy), so this energy has been transferred to other stores / the total energy is still the same as the energy supplied

    DO NOT ALLOW the energy is used up.

  4. 1 mark

    it is transferred (by heating) to the thermal store of the kettle (element and body) and the thermal store of the surroundings / air

    ALLOW it is dissipated / wasted to the surroundings. ALLOW heat (energy) store for thermal store. IGNORE sound.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.