Question 1
1 markA student uses a ripple tank. A signal generator makes the dipper vibrate, producing water waves with a frequency of about 20 Hz.
Which is the most suitable way to find the frequency of the waves?
Choose your answer.
- A count waves by eye for 10 s
- B time one wave with a stopwatch
- C read the signal generator display
- D measure the gap between waves
Model answer
C - read the signal generator display.
Explanation
The waves are produced by the vibrating dipper, so their frequency equals the frequency of the signal generator. Counting waves is only practical at low frequencies of a few hertz; at about 20 Hz it is impossible by eye. Measuring the spacing of the waves gives the wavelength, a different quantity.
Mark scheme
-
1 mark
C / read the signal generator display (1)
The only correct answer is C: the dipper makes one wave for each vibration, so the waves have the frequency shown on the signal generator, which is read precisely. A is not correct because about 200 waves pass in 10 s, far too many and too fast to count by eye; B is not correct because one wave takes only about 0.05 s, much less than a person's reaction time; D is not correct because the gap between waves is the wavelength, not the frequency. Accept the letter or the option. If more than one option is given, do not award the mark.