The big idea
When a force causes an object to move through a distance, work is done on the object. Doing work is a way of transferring energy, so work is measured in joules, like energy. Work done against friction always ends up warming things, which is why brakes and rubbing hands get hot.
Calculating work done
A force does work on an object when the force causes a displacement of the object. You must recall this equation (it is not on the equation sheet):
\[\text{work done} = \text{force} \times \text{distance moved along the line of action of the force}\]
\[W = Fs\]
- work done, \(W\), in joules, J
- force, \(F\), in newtons, N
- distance, \(s\), in metres, m
The distance must be along the line of action of the force (in the direction the force acts). So:
- if the object does not move, no work is done, however hard you push: holding a heavy suitcase still does no work on it;
- a force at right angles to the motion does no work: the upward force holding a bag as you walk along a level path does no work on the bag;
- when you push a box up a ramp, the work you do uses the length of the ramp (the direction of your push), not its vertical height.
Joules and newton-metres
One joule of work is done when a force of one newton causes a displacement of one metre. So 1 joule = 1 newton-metre (1 J = 1 N m), and converting is one-for-one: 350 N m = 350 J, and 4.2 kN m = 4200 N m = 4200 J.
Before you calculate, convert to newtons and metres: kN × 1000 gives N, cm ÷ 100 gives m, km × 1000 gives m. An answer in J can then be converted: J ÷ 1000 gives kJ.
Energy transfers when work is done
The work done is equal to the energy transferred. To describe the transfer, name the force doing the work and the energy stores that change.
| What happens | Force doing work | Energy transfer |
|---|
| Lifting a crate onto a lorry | Your lifting force | Chemical store of your muscles → gravitational potential energy store of the crate |
| A stone falling | Its weight (gravity) | Gravitational potential energy store → kinetic energy store |
| Dragging a box across a floor at a steady speed | Your pull, against friction | Chemical store → thermal stores of the box, floor and surroundings |
| A bicycle braking | Friction from the brakes | Kinetic energy store → thermal store of the brakes |
Work done against the frictional forces acting on an object causes a rise in the temperature of the object. This energy is usually dissipated to the surroundings and wasted.
Kicking a football
A footballer's boot pushes on a ball with an average force of 450 N. While the boot is touching it, the ball moves 16 cm in the same direction as the push. How much work does the boot do, and how much energy does the ball gain? Ignore any energy dissipated.
Convert: \(16\text{ cm} = 0.16\text{ m}\)
\(W = Fs = 450 \times 0.16 = 72\text{ J}\)
The work done transfers 72 J to the kinetic energy store of the ball.
Sanding a shelf
A carpenter sands a wooden shelf by hand. The friction force between the sandpaper and the wood is 12 N, and each stroke moves the sandpaper 25 cm. Calculate the work done against friction in 40 strokes, and explain why the wood gets warm.
Total distance: \(40 \times 25\text{ cm} = 1000\text{ cm} = 10\text{ m}\)
\(W = Fs = 12 \times 10 = 120\text{ J}\)
The work done against friction transfers 120 J to the thermal energy stores of the wood and the sandpaper, so their temperature rises. The energy is then dissipated to the surroundings.
Remember
- \(W = Fs\) must be recalled; \(W\) in J, \(F\) in N, \(s\) in m.
- 1 J = 1 N m.
- Work done = energy transferred.
- Work done against friction raises the temperature.
Common mistakes
- Using the mass instead of the weight when something is lifted. Find the weight first (weight = mass × gravitational field strength), then multiply it by the height.
- Leaving a distance in centimetres: 40 cm is 0.40 m.
- Saying work is done when an object is held still. With no displacement, no work is done on it.
- Writing "heat" or "energy is lost". Say energy is transferred to the thermal energy store (and dissipated to the surroundings).
- Using the vertical height for the work done pushing along a ramp. Use the distance along the line of the push.
Exam tip
For "describe the energy transfer" questions, name the store the energy comes from and the store it goes to, for example "from the kinetic energy store of the car to the thermal energy store of the brakes". A force that does work against friction always links to a temperature rise.