A student cracks liquid paraffin, a mixture of alkanes, in the laboratory.
- Mineral wool soaked in liquid paraffin is put at the closed end of a boiling tube.
- Pieces of porous pot (a catalyst) in the middle of the tube are heated strongly, and the paraffin vapour passes over them.
- The gas produced passes along a delivery tube and is collected in test tubes over water.
The student throws away the first test tube of gas collected.
Suggest why the student throws away the first test tube of gas.
Explain why the delivery tube must be taken out of the water before the student stops heating.
Model answer
The first test tube of gas is mainly the air that was in the boiling tube and delivery tube before the cracking started, pushed out by the paraffin vapour, so it is not the gas made by cracking.
If the student stopped heating with the delivery tube still in the water, the gas in the boiling tube would cool and contract, so the pressure inside would fall. Cold water would then be sucked back up the delivery tube into the very hot boiling tube, which could crack or shatter.
Explanation
Collecting a gas over water always pushes out the air in the apparatus first, so the first tube is discarded. 'Suck-back' happens when hot gas cools and contracts: removing the delivery tube from the water before stopping heating prevents cold water reaching the hot glass. The catalyst and strong heating are needed to break the alkane molecules into smaller ones.