Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
Avg
score:
–
Topics
done:
0/26

Conservation of mass, reacting masses and concentration

Practise 13 exam-style questions on Conservation of mass, reacting masses and concentration for Edexcel GCSE Combined Science (Chemistry Paper 2). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 13 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
13 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

Hydrogen peroxide solution is used to bleach hair. Over time, the hydrogen peroxide in the solution decomposes and oxygen gas escapes.

2H₂O₂ → 2H₂O + O₂

(relative atomic masses: H = 1.0, O = 16)

What mass of hydrogen peroxide must decompose to form 0.80 g of oxygen?

Choose your answer.

  • A 0.85 g
  • B 0.90 g
  • C 1.7 g
  • D 3.4 g

Model answer

C - 1.7 g
Moles of O₂ = 0.80 ÷ 32 = 0.025 mol
2 mol of H₂O₂ form 1 mol of O₂, so moles of H₂O₂ = 2 × 0.025 = 0.050 mol
Mass of H₂O₂ = 0.050 × 34 = 1.7 g

Explanation

Work backwards from the product: convert the mass of oxygen to moles using 32 for O₂, use the 2 : 1 ratio from the equation, then multiply by the relative formula mass of H₂O₂ (34). A check by conservation of mass: 1.7 g of hydrogen peroxide forms 0.80 g of oxygen and 0.90 g of water. Using 16 for oxygen gas, or ignoring the 2 in front of H₂O₂, gives the wrong options.

Mark scheme
  1. 1 mark

    C / 1.7 g (1)

    The only correct answer is C: 0.80 g of O₂ is 0.80 ÷ 32 = 0.025 mol; the equation shows that 2 mol of H₂O₂ form 1 mol of O₂, so 2 × 0.025 = 0.050 mol of H₂O₂ is needed, and 0.050 × 34 = 1.7 g. A is not correct because 0.85 g uses a 1 : 1 ratio (0.025 × 34) instead of the 2 : 1 ratio in the equation; B is not correct because 0.90 g is the mass of water formed (0.050 × 18), not the mass of hydrogen peroxide; D is not correct because 3.4 g comes from dividing 0.80 by 16 instead of 32, as if oxygen gas were made of single O atoms. Accept the letter or the option. If more than one option is given, do not award the mark.

Question 2

2 marks

The fish in a garden pond need oxygen that is dissolved in the water. When the water is saturated with air, the concentration of dissolved oxygen is 0.0113 g dm⁻³ at 10 °C, but only 0.0083 g dm⁻³ at 25 °C.

The pond holds 2.5 m³ of water (1 m³ = 1000 dm³). Between spring and summer, the water warms from 10 °C to 25 °C. Assume that the water is saturated with air at both temperatures.

Calculate the mass of oxygen, in g, that leaves the water as it warms.

Model answer

Volume of water = 2.5 × 1000 = 2500 dm³
Mass of oxygen dissolved at 10 °C = 0.0113 × 2500 = 28.25 g
Mass of oxygen dissolved at 25 °C = 0.0083 × 2500 = 20.75 g
Mass of oxygen that leaves the water = 28.25 - 20.75 = 7.5 g

Explanation

Rearranging concentration = mass ÷ volume gives mass = concentration × volume, with the volume in dm³. Either work out the mass dissolved at each temperature and subtract, or multiply the fall in concentration (0.0030 g dm⁻³) by the volume. Forgetting to convert 2.5 m³ into 2500 dm³ gives an answer 1000 times too small.

Mark scheme
  1. 1 mark

    (volume = 2.5 × 1000 = 2500 dm³, so mass of oxygen lost =) (0.0113 × 2500) - (0.0083 × 2500) / 28.25 - 20.75 / (0.0113 - 0.0083) × 2500 (1)

    7.5 (g) with or without working scores 2. The mass dissolved at one temperature only (28.25 g or 20.75 g, from mass = concentration × volume) given as the final answer scores MP1 only. An answer with a power of ten error (e.g. 0.0075 g, from not converting m³ to dm³, or 7500 g) scores 1. Dividing (e.g. 0.0030 ÷ 2500) is a wrong method and scores 0.

  2. 1 mark

    7.5 (g) (1)

    Accept 7.50. Accept 7500 mg if the unit is given.

Question 3

3 marks

Hydrogen chloride is made by burning hydrogen in chlorine.

H₂ + Cl₂ → 2HCl

(relative atomic masses: H = 1.0, Cl = 35.5)

Calculate the mass of hydrogen chloride that forms when 0.40 g of hydrogen reacts completely with chlorine.

Model answer

Relative formula mass of H₂ = 2 × 1.0 = 2.0
Moles of H₂ = 0.40 ÷ 2.0 = 0.20 mol
From the equation, 1 mol of H₂ forms 2 mol of HCl, so moles of HCl = 2 × 0.20 = 0.40 mol
Relative formula mass of HCl = 1.0 + 35.5 = 36.5
Mass of hydrogen chloride = 0.40 × 36.5 = 14.6 g

Explanation

Convert the mass of hydrogen to moles using 2.0 for H₂ (hydrogen gas is diatomic), use the 1 : 2 ratio from the equation, then convert the moles of HCl to a mass. Using 1.0 for hydrogen doubles the answer, and forgetting the ratio halves it. The product is much heavier than the hydrogen because it also contains the chlorine (14.2 g), as conservation of mass requires.

Mark scheme
  1. 1 mark

    (relative formula mass of H₂ = 2.0, so moles of H₂ =) 0.40 ÷ 2.0 = 0.2(0) (1)

    14.6 (g) with or without working scores 3. Allow ECF throughout. Alternative method using masses: 2.0 g of H₂ forms 2 × 36.5 = 73 g of HCl (MP1 and MP2), so 0.40 g forms 0.40 × 73 ÷ 2.0 = 14.6 g (MP3). Alternative method by conservation of mass: 0.20 mol of Cl₂ = 14.2 g reacts, so mass of HCl = 0.40 + 14.2 = 14.6 g. With working: 29.2 g (relative formula mass of H₂ taken as 1.0) scores 2; 7.3 g (the 1 : 2 ratio not used) scores 2. Inverted division (2.0 ÷ 0.40) does not score MP1.

  2. 1 mark

    (moles of HCl = 2 × 0.20 =) 0.4(0) (1)

    Allow ECF from MP1 using the 1 : 2 ratio of H₂ to HCl.

  3. 1 mark

    (relative formula mass of HCl = 36.5, so mass = 0.40 × 36.5 =) 14.6 (g) (1)

    Allow ECF from MP2. Allow 15 (g).

Question 4

4 marks

A technician has two bottles of sodium thiosulfate solution. She mixes 25.0 cm³ of a solution with a concentration of 40.0 g dm⁻³ with 75.0 cm³ of a solution with a concentration of 8.0 g dm⁻³.

Calculate the concentration of sodium thiosulfate in the mixture, in g dm⁻³. Assume that the volume of the mixture is the sum of the two volumes.

Model answer

Mass of sodium thiosulfate in 25.0 cm³ of the first solution = 40.0 × 0.0250 = 1.00 g
Mass in 75.0 cm³ of the second solution = 8.0 × 0.0750 = 0.60 g
Total mass = 1.00 + 0.60 = 1.60 g
Total volume = 25.0 + 75.0 = 100 cm³ = 0.100 dm³
Concentration = 1.60 ÷ 0.100 = 16.0 g dm⁻³

Explanation

Concentrations cannot simply be averaged when different volumes are mixed. Find the mass of solute in each portion (concentration × volume in dm³), add the masses and divide by the total volume. The simple mean, 24 g dm⁻³, is wrong because there is three times as much of the weaker solution.

Mark scheme
  1. 1 mark

    (mass in first solution =) 40.0 × 0.0250 = 1.0(0) (g) (1)

    16(.0) (g dm⁻³) with or without working scores 4. Allow ECF throughout. Allow the weighted-mean method: (40.0 × 25.0 + 8.0 × 75.0) ÷ 100 = 16.0 for all 4 marks. (40.0 + 8.0) ÷ 2 = 24 (a simple mean, ignoring the different volumes) is a wrong method and scores 0. An answer with a power of ten error in an otherwise correct method (e.g. 0.016, from dividing 1.60 g by 100 cm³ instead of 0.100 dm³) scores 3.

  2. 1 mark

    (mass in second solution =) 8.0 × 0.0750 = 0.6(0) (g) (1)

    Allow 40.0 × 25.0 ÷ 1000 and 8.0 × 75.0 ÷ 1000 for MP1 and MP2.

  3. 1 mark

    (total mass = 1.60 g in a total volume of) 25.0 + 75.0 = 100 cm³ = 0.100 dm³ (1)

    Allow ECF from MP1 and MP2 for the total mass.

  4. 1 mark

    (1.60 ÷ 0.100 =) 16(.0) (g dm⁻³) (1)

    Allow ECF for the student's total mass ÷ 0.100.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.