Level:
Correct: 0
Incorrect: 0
Marks: 0/0

Transverse and longitudinal waves

Practise 15 exam-style questions on Transverse and longitudinal waves for OCR GCSE Combined Science (Physics Paper 6). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 15 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
15 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

A student uses a ripple tank to study waves.

Which part of the apparatus makes ripples with a steady frequency?

Choose your answer.

  • A a lamp above the tank
  • B a metre rule beside the tank
  • C a stopwatch
  • D a vibrating dipper touching the water

Model answer

D (a vibrating dipper touching the water)

Explanation

In a ripple tank, a dipper (a small bar or ball) is moved up and down by a motor or vibration generator. Every time it dips into the water it makes one ripple, so the ripples are made at a steady frequency, the same as the frequency of the dipper. The lamp, ruler and stopwatch help you to see and measure the ripples, but they do not make them.

Mark scheme
  1. 1 mark

    D / a vibrating dipper touching the water

    The only correct answer is D: a motor (or a vibration generator) makes the dipper move up and down at a steady rate, and each vibration makes one ripple, so the ripples have a steady frequency. A is not correct because the lamp only lights the ripples so that their pattern can be seen on paper below the tank; B is not correct because the metre rule is used to measure distances, such as across several wavelengths; C is not correct because the stopwatch is used to measure times. ALLOW the letter or the option. If more than one option is given, do not award the mark.

Question 2

2 marks

A student wants to measure the speed of the ripples in a ripple tank. She plans to time one ripple as it travels from one end of the tank to the other.

Her teacher tells her to make a single ripple, by dipping a ruler into the water once, instead of using the dipper to make a continuous series of ripples.

Explain why.

Model answer

When the dipper makes a continuous series of ripples, all the ripples look the same, so it is very hard to keep track of one ripple as it crosses the tank. She might start the stopwatch for one ripple and stop it when a different ripple reaches the far end, so her time would be wrong. With a single ripple there is only one to watch, so she times the same ripple all the way across.

Explanation

To find a speed by timing, she needs the time for one particular ripple to travel a measured distance. A single ripple is easy to follow, but in a train of identical ripples it is easy to lose track and time the wrong one. The dipper is useful when the speed is found in a different way, from the frequency and the wavelength.

Mark scheme
  1. 1 mark

    in a continuous series the ripples all look the same, so it is hard to follow (keep track of) one ripple

    ALLOW it is hard to tell which ripple is which.

  2. 1 mark

    so she might start timing one ripple and stop timing when a different ripple reaches the end, so the time (and the speed) would be wrong / with a single ripple she can be sure she times the same ripple across the whole tank

    ALLOW the time measured might not be the time for one ripple to cross the tank. IGNORE 'to make it a fair test' or 'to make it more accurate' with no reason linked to following one ripple.

Question 3

2 marks

Two students measure the speed of sound on a playing field. They stand 100 m apart. Each holds a phone running an app that records the time at which a loud sound reaches the phone. One student claps once, and they work out the time taken by the sound from the difference between the two phones' readings.

Explain why the clocks in the two phones must show exactly the same time.

Model answer

The time taken is found by subtracting one phone's reading from the other's, and each reading comes from a different clock. If one clock were ahead of the other, the difference between the readings would include this clock error as well as the time taken by the sound. Sound takes only about 0.3 s to travel 100 m, so even a clock difference of a few hundredths of a second would be a large fraction of the time and would make the speed very wrong.

Explanation

The phones detect the clap themselves, so the method has no reaction-time error, but it only works if both clocks agree. Over 100 m the sound takes about 100 ÷ 340 = 0.29 s, so a clock difference of 0.03 s would change the time, and so the speed, by about 10%.

Mark scheme
  1. 1 mark

    each phone records the time with its own clock, so any difference between the two clocks is added to (or taken away from) the time taken by the sound / the difference between the readings would not be the real time taken

    ALLOW if one clock is ahead of the other, the measured time will be too long (or too short).

  2. 1 mark

    the sound takes only a short time to travel 100 m (about 0.3 s), so even a small difference between the clocks (for example 0.03 s) is a large fraction of the time, so the speed calculated would be very wrong

    ALLOW the time is less than a second, so a small error in the time makes a large error in the speed. IGNORE references to reaction time.

Question 4

4 marks

A timekeeper stands at the finish line of a 100 m race. She starts her stopwatch when she hears the sound of the starting gun, instead of when she sees the smoke from the gun. She stops the stopwatch when the winner crosses the finish line.

Her stopwatch shows a time of 12.62 s for the winner.

The speed of sound in air is 340 m/s. Light from the gun reaches her almost instantly.

Calculate the winner's real time for the race.

Model answer

time for the sound to travel 100 m = distance ÷ speed = 100 ÷ 340 = 0.29 s
The stopwatch started 0.29 s after the race began, so the real time is longer.
real time = 12.62 + 0.29 = 12.91 s

Explanation

The race starts when the gun is fired, but the sound takes 100 ÷ 340 = 0.29 s to reach the finish line. The timekeeper started her stopwatch late, so the stopwatch time is too short, and the time for the sound must be added: 12.62 + 0.29 = 12.91 s. Subtracting the 0.29 s is the usual slip. This is why timekeepers start their watches on seeing the smoke or flash.

Mark scheme
  1. 1 mark

    recall and substitution: time = distance ÷ speed = 100 ÷ 340; or a correct final answer of 12.91 s (or from 12.9 s to 12.92 s) with no working

    An answer of 12.91 s, or any answer from 12.9 s to 12.92 s, with no working scores 4 marks. DO NOT ALLOW 340 ÷ 100 or 100 × 340.

  2. 1 mark

    time for the sound to reach her = 0.29 (s) / 0.294 (s); or a correct final answer of 12.91 s (or from 12.9 s to 12.92 s) with no working

    ALLOW 0.3 s.

  3. 1 mark

    the stopwatch started late, so add the time for the sound: 12.62 + 0.29; or a correct final answer of 12.91 s (or from 12.9 s to 12.92 s) with no working

    ALLOW ECF from a wrong time for the sound if it is added. An answer of 12.33 s (the time subtracted) scores marking points 1 and 2 only.

  4. 1 mark

    evaluation: 12.91 (s) / 12.9 (s) / 12.92 (s)

    ALLOW ECF from a wrong time for the sound correctly added. IGNORE units, as the question does not ask for them.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.